PDA

View Full Version : Paging Scott Pearson



scippy
04-22-2017, 09:28 PM
Hello Scott....tried to PM you, but your mailbox is full ...anyway, need a little help on the PPG paint side of things.
Just fabricated a new tubular steel winch stand for my white Myco trailer..need to prime & paint it...attempting to
spray paint it myself :bonk:just picked up 30 gal compressor :yes: anyways, recommended is PPG DP481F White epoxy
primer then finish with top coat PPG DCC single stage......Can you recommend where to buy?.....I'm not far from
you ..I'm in Jackson.....do I also need hardeners & thinners?........I'm thinking 1 qt. primer & 1 qt. top coat max?
Any help here would be just great!.........picture of the winch stand enclosed.....thanks, Scippy!

Scott Pearson
04-24-2017, 07:41 AM
You will need DP48LF with DP402 LF Hardener. DCC Color with DCX61 Hardner as well as DT885 reducer for both. Go to www.ppgrefinish.com and look for products. Both of these will be under Deltron. You can order from Norwood or Flannery Automotive in Freehold or Finish Master in Toms River.

Hope that helps.

scippy
04-24-2017, 01:37 PM
Thanks Scott.......appreciate it!