2017 Repowering of my Sweet 16

[John C in PA]

Here is the reman engine just about ready for the install. 302 Ford, GT40 heads, ~9.5:1 CR, Summit dual plane intake, Holley 450 CFM 4-bbl Marine carb speced for a 302, Lunati mild (for stock springs) roller cam.

85701


85702

85703

85704

Can't wait for Summer. Watch out Chachi :yes:

John C

[Offset]

Very nice combination. Have fun with it John.

[Pat McPherson]

What are you installing for exhaust?

[John C in PA]

What are you installing for exhaust?

Im staying with the OEM risers which are 4" diameter and terminating at straight thru cans. I know, I know, but grenading the OEM engine severely taxed our savings account :garfield: and lighter, better replacement exhausts are out of the question.

John C

PS: Pat, are open cans ok at the Connecticut River Run you always post about?

[Pat McPherson]

Pat, are open cans ok at the Connecticut River Run you always post about?

I run open exhaust at the CT river run.

From Memorial day to Labor day, I bolt inside my tips a set of cheap mufflers just to take the edge off.

[John C in PA]

I run open exhaust at the CT river run.

From Memorial day to Labor day, I bolt inside my tips a set of cheap mufflers just to take the edge off.

Maybe his year.

John C