View Full Version : 2017 Repowering of my Sweet 16
John C in PA
03-03-2017, 09:55 AM
Here is the reman engine just about ready for the install. 302 Ford, GT40 heads, ~9.5:1 CR, Summit dual plane intake, Holley 450 CFM 4-bbl Marine carb speced for a 302, Lunati mild (for stock springs) roller cam.
85701
85702
85703
85704
Can't wait for Summer. Watch out Chachi :yes:
John C
Offset
03-03-2017, 10:36 AM
Very nice combination. Have fun with it John.
Pat McPherson
03-03-2017, 11:15 AM
What are you installing for exhaust?
John C in PA
03-03-2017, 12:52 PM
What are you installing for exhaust?
Im staying with the OEM risers which are 4" diameter and terminating at straight thru cans. I know, I know, but grenading the OEM engine severely taxed our savings account :garfield: and lighter, better replacement exhausts are out of the question.
John C
PS: Pat, are open cans ok at the Connecticut River Run you always post about?
Pat McPherson
03-03-2017, 01:54 PM
Pat, are open cans ok at the Connecticut River Run you always post about?
I run open exhaust at the CT river run.
From Memorial day to Labor day, I bolt inside my tips a set of cheap mufflers just to take the edge off.
John C in PA
03-03-2017, 08:55 PM
I run open exhaust at the CT river run.
From Memorial day to Labor day, I bolt inside my tips a set of cheap mufflers just to take the edge off.
Maybe his year.
John C
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.