PDA

View Full Version : S&J 383 Stroker



Greg Guimond
06-10-2016, 07:11 AM
...........

duckhunter
06-10-2016, 06:51 PM
440hp @5100 is pretty stout for a 383. Wonder if the cam will work with wet exhaust?

Gotta wonder where $$ was saved too; $3,500 doesn't leave room for any killer parts.

gcarter
06-10-2016, 07:54 PM
440hp @5100 is pretty stout for a 383. Wonder if the cam will work with wet exhaust?

Gotta wonder where $$ was saved too; $3,500 doesn't leave room for any killer parts.

Agreed. Probably cast pistons, stock rods, ets...nothing to say different.

tmdog
06-10-2016, 09:24 PM
Checked their site. All engines are "remanufactured". You get what you pay for. Buyer beware.:lookaroun:

fegettes
06-11-2016, 12:33 PM
I am guessing internals are Chinese, not worth paper weight material. ......I hope I am not offending any Chinese here on this site.

Steve

olredalert
06-12-2016, 10:07 AM
----Specs on my Tyler Crockett 383s are just about the opposite. 415 horsies and 460ftlb of torque. They cost a bit more but they will live......Bill S

tmdog
06-12-2016, 01:10 PM
----Specs on my Tyler Crockett 383s are just about the opposite. 415 horsies and 460ftlb of torque. They cost a bit more but they will live......Bill S

What is the cam degree and lift? :confused:

maddad
06-13-2016, 11:57 AM
415 lbs of torque at 5100 rpm is only 403 hp.

Greg Guimond
06-23-2016, 06:56 AM
........................

Pat McPherson
06-23-2016, 03:01 PM
That's a lot of money for a 14year old engine without a warranty.