PDA

View Full Version : Had to buy 50 of these to get a few. Donzi logo's



bertsboat
02-25-2016, 04:13 PM
I have 30 to sell. $10.00 ea plus $3.50 SH or 4 for $30.00 plus $5.00 S&H
I am making nothing.
They are metal and porcelain. They are beautiful
2-3/16" flat on the back.
paypal to bertsboat@mindspring.com
Thanks

wwahl
02-25-2016, 07:44 PM
I am unable to figure out what they are used for. Please give me a hint.

Hilltopper
02-25-2016, 07:47 PM
Steering wheel for starters and I just ordered four.

JParanee
02-26-2016, 04:32 AM
I would like one just sent funds

thank you

Carl C
02-26-2016, 06:59 AM
I would like 4 of them. Don't have paypal. Can I send you a check and then you send them after check clears. Let me know or call me at 248-330-0048. Thanks. Carl.

PM or post address and I'll send a check today!

Pat McPherson
02-26-2016, 08:32 AM
I would like 4 of them. Don't have paypal. Can I send you a check and then you send them after check clears. Let me know or call me at 248-330-0048. Thanks. Carl.

PM or post address and I'll send a check today!

I'd like to buy also.
Post, PM, or email me your info, and I'll send a check.
my e-mail: tmcpherson10@aol.com

Carl C
02-26-2016, 01:25 PM
I would like 4 of them. Don't have paypal. Can I send you a check and then you send them after check clears. Let me know or call me at 248-330-0048. Thanks. Carl.
PM or post address and I'll send a check today!

Please please please! I really want these. :) You will sell them fast.

bertsboat
02-26-2016, 05:21 PM
PM me and I will give you my mailing address and I will save what you need.
And to everybody that paid me through PayPal. I am sending Saturday morning.
Thanks !!

Carl C
02-26-2016, 05:55 PM
PM received. Check is ready to mail and will go out tonight or tomorrow. Thanks Bert. Paypal doesn't need a piece of the action! Sending $35 for four of them.

smokediver
02-27-2016, 10:12 AM
I just sent funds for 4. Thanks !

danz
02-27-2016, 10:26 PM
bert, just sent you paypal funds for 2 emblems, thanks, dan

Greg Guimond
02-28-2016, 06:22 AM
Bert, nice find. I just sent $35 via paypal for 4. Thanks :cool:

retroicon
02-29-2016, 04:20 AM
Paid as well.

harleybagger
02-29-2016, 03:48 PM
I have 30 to sell. $10.00 ea plus $3.50 SH or 4 for $30.00 plus $5.00 S&H
I am making nothing.
They are metal and porcelain. They are beautiful
2-3/16" flat on the back.
paypal to bertsboat@mindspring.com
Thanks

I would like 4 if you have any left?
thank you!
Dennis
harleybagger@gmail.com

Hilltopper
02-29-2016, 05:09 PM
PM me and I will give you my mailing address and I will save what you need.
And to everybody that paid me through PayPal. I am sending Saturday morning.
Thanks !!

Were our PayPal orders shipped? Please provide ship info on PayPal.

ivypandas
02-29-2016, 09:28 PM
Were our PayPal orders shipped? Please provide ship info on PayPal.

I also paid by PayPal and would like to know the status of the order.

Thanks,

Davis (aka ivypandas)

Bobby D
03-01-2016, 11:51 AM
I would be interested in buying one to install at the SS hub cover, who has done this for a 3 bolt wheel cover?
I ask this question because my existing SS cover is convex or razed in shape and the metal logo is flat.
Bert nice piece by the way.

olredalert
03-02-2016, 09:41 AM
----Got my Donzi and Fino emblems today and I am impressed. They are excellent. Big thanks Bert!!!!!!........Bill S

CHACHI
03-02-2016, 12:08 PM
Bert, my emblems just arrived.

Much heavier than I though, excellent.

Thank you.

Ken

bertsboat
03-02-2016, 02:01 PM
If you paid me I shipped them Minday. My email address is bertsboat@mindspring.com
Maybe your donzi name is not the same as your real name so if you are asking me if I send something I have to know your name. Just email me.

bertsboat
03-02-2016, 02:05 PM
They will not fit on that cap. You will have to find the original style. I am working on getting some now and as soon as I do I will post. They look like this.
I would be interested in buying one to install at the SS hub cover, who has done this for a 3 bolt wheel cover?
I ask this question because my existing SS cover is convex or razed in shape and the metal logo is flat.
Bert nice piece by the way.

bertsboat
03-02-2016, 02:21 PM
Sent Monday USPS. Be patient, your postal employees are very uninterested in working too hard. Remember, they loose 10 BILLION dollars a year. They are bleeding the American tax payers to death!!


I also paid by PayPal and would like to know the status of the order.

Thanks,

Davis (aka ivypandas)

Carl C
03-02-2016, 02:56 PM
I got mine today and am very happy with them. I plan to put one on the dash with 4200. Not sure about the others yet. Great find, Bert, and thank you!

bertsboat
03-02-2016, 03:47 PM
Better use 3M double back tape in case you change your mind or something. They will stay on.
DON'T USE 5200 PLEASE


I got mine today and am very happy with them. I plan to put one on the dash with 4200. Not sure about the others yet. Great find, Bert, and thank you!

Carl C
03-02-2016, 04:13 PM
Better use 3M double back tape in case you change your mind or something. They will stay on.
DON'T USE 5200 PLEASE

4200 not 5200! ;)

Fishermanjm
03-02-2016, 08:59 PM
Are they gone Bert??? I just saw this. been away for a while. Let me know please

ivypandas
03-02-2016, 09:00 PM
I also paid by PayPal and would like to know the status of the order.

Thanks,

Davis (aka ivypandas)

I got mine today and it looks great. Thanks!

penbroke
03-02-2016, 09:24 PM
PayPal sent.


Thanks!
Frank

bertsboat
03-02-2016, 09:55 PM
Thanks to everybody for helping me get these gone. I only wanted 10 or 15 for myself and some for gifts.

if get enough requests I will do it again. Again, I don't do this for profit. It's my hobby.
Please post some pictures of your madalian mounted on your boat or whever.

JParanee
03-03-2016, 12:01 AM
Did I make the cut ?

Thx

Carl C
03-03-2016, 06:59 AM
I don't think you'd have a problem getting rid of another batch, Bert.

bertsboat
03-03-2016, 07:22 AM
Anyone that sent payment so far will be covered. It was fun, thanks

Bobby D
03-03-2016, 09:51 AM
Bert,
Did that cap come off a Donzi? I can see and understand how it will work and receive the logo but I was not aware that it was the original style. My 72 wheel is original however the hub cover was in bad shape so I replaced it with what you see in picture. Although not an exact match itís very close.

bertsboat
03-03-2016, 05:50 PM
I am working on having the original chrome brass style made now. I will post here when I have them ready. They will cost about 75 to 100 dollars however.
Did you toss your old one? I have some nice bubble stickers that look just like the emblems that work in that crowned button. Whats your address and I will send you one free.
Thanks

Bobby D
03-04-2016, 10:57 AM
10-4 Iíll send you PM.

Carl C
03-04-2016, 11:37 AM
There are a lot of potential uses for the current ones. They can be cemented to soft or hard coolers or anything else with a flat surface to make it Donzi specific. You could also mill out holes in wood coasters and embed them in the coasters. One could also be drilled out and worn as a pendant. Reggie Fountain style! Could a hole be drilled in one without shattering the porcelain?

Ed Donnelly
03-05-2016, 04:58 PM
Might make some more of these for Chritmas gifts

Ed Donnelly
03-05-2016, 05:02 PM
This from Bill

smokediver
03-07-2016, 08:10 PM
Thanks Bert these are really nice !!

JParanee
03-08-2016, 07:18 PM
well I popped the cheesy plastic one out and put Berts enameled one in

http://i200.photobucket.com/albums/aa302/jparanee/Vehicles/D566DBFD-0B22-4272-9AE9-FAD327C50691.jpg (http://s200.photobucket.com/user/jparanee/media/Vehicles/D566DBFD-0B22-4272-9AE9-FAD327C50691.jpg.html)

the cheesy plastic one was meant to go in the center of my Hardin Control

http://i200.photobucket.com/albums/aa302/jparanee/Vehicles/6FCD43ED-EC55-4AA9-B6FB-8FB947C7FC4A.jpg (http://s200.photobucket.com/user/jparanee/media/Vehicles/6FCD43ED-EC55-4AA9-B6FB-8FB947C7FC4A.jpg.html)

really a nice badge

thx Bert

http://i200.photobucket.com/albums/aa302/jparanee/Vehicles/227DEF88-B1E3-4DD2-BC70-E812EDC8D4C7.jpg (http://s200.photobucket.com/user/jparanee/media/Vehicles/227DEF88-B1E3-4DD2-BC70-E812EDC8D4C7.jpg.html)

bertsboat
03-09-2016, 09:20 AM
Sweet!!


well I popped the cheesy plastic one out and put Berts enameled one in

http://i200.photobucket.com/albums/aa302/jparanee/Vehicles/D566DBFD-0B22-4272-9AE9-FAD327C50691.jpg (http://s200.photobucket.com/user/jparanee/media/Vehicles/D566DBFD-0B22-4272-9AE9-FAD327C50691.jpg.html)

the cheesy plastic one was meant to go in the center of my Hardin Control

http://i200.photobucket.com/albums/aa302/jparanee/Vehicles/6FCD43ED-EC55-4AA9-B6FB-8FB947C7FC4A.jpg (http://s200.photobucket.com/user/jparanee/media/Vehicles/6FCD43ED-EC55-4AA9-B6FB-8FB947C7FC4A.jpg.html)

really a nice badge

thx Bert

http://i200.photobucket.com/albums/aa302/jparanee/Vehicles/227DEF88-B1E3-4DD2-BC70-E812EDC8D4C7.jpg (http://s200.photobucket.com/user/jparanee/media/Vehicles/227DEF88-B1E3-4DD2-BC70-E812EDC8D4C7.jpg.html)