View Full Version : Donzi Walnut Shifter knobs.
Scott Pearson
03-07-2015, 06:46 PM
I will be making more Donzi walnut shifter knobs this week. Please let me know who needs one and what style. I will only make ones for people that confirm with me that they want one. I have a little bit of time this weekend to get then finished and not sure when I will be making more. So please get them while you can! They are $100.00 plus $10.00 S&H
Thanks!
Rob M
03-07-2015, 07:03 PM
Scott,
Need one in the older Propeller Logo style. Let me know your payment preference and if you ship to Canada. Thanks
Rob
Scott Pearson
03-07-2015, 07:07 PM
Rob,
I will send you my paypal information as soon as I have them complete. I should have them ready to ship by this weekend. Not a problem shipping to Canada. It would be $10.00 more for shipping.
If that will work for you I will make sure I have one done for you!
Thank you!
Rob M
03-07-2015, 07:12 PM
Great. That works for me - need to dig up my PP account info. Thanks Scott.
Rob
tiupc
03-07-2015, 08:13 PM
Hi Scott,
I would be interested in one with the lion and dolphin. I also live in Canada but can pay through paypal. Please let me know
Thanks
Trevor
Scott Pearson
03-07-2015, 09:44 PM
Trevor,
Ok sounds good. Thank you! I will post later this week with progress and paypal information.
Thank you again!
Ed Donnelly
03-08-2015, 07:27 AM
They are works of art. Too bad I don't have the same throttle in the 16 as I had in the 22, I would have bought one of each just for variety...Ed
Scott Pearson
03-08-2015, 08:20 AM
At this time I have 7 sold. If I don't hear from anyone else I will be making enough to fill that order.
Thank you!
Scott Pearson
03-08-2015, 08:41 AM
OK just got more messages....10 sold! Any more takers?
jl1962
03-08-2015, 09:05 AM
These are great BTW.
I don't even own the boat anymore and I'm tempted to get another.....
81640
Scott Pearson
03-08-2015, 09:07 AM
Thanks Jay!
bertsboat
03-08-2015, 09:35 AM
Please put me down for one of each. Shall I PayPal now?
Thanks in advance,
Bert
Scott Pearson
03-08-2015, 10:06 AM
That's 13 sold!
Bert,
No t a problem. Thank you! I will post paypal info later this week.
Thank you everyone!
Scott Pearson
03-08-2015, 12:11 PM
Ok thank you everyone. I have 14 going out and that's all I will be making for now. I will post another thread when I make another run of them. The first coats of clear were applied today! I will keep everyone up to date whem they are finished.
Hi Scott,
Just checking that I'm on the list for lion/dolphin (private message has been hit or miss; pm sent yesterday).
Thanks,
Dan
Scott Pearson
03-09-2015, 11:35 AM
Yes, your on the list.
Scott Pearson
03-11-2015, 06:49 AM
Ok 14 knobs have all been cleared...wet sanded and re-cleared. They look amazing! I used a new type of clearcoat that we came out with recently. I was tempted to try a clear coat that is soft to the touch on a knob for myself but didn't have the room on the rack. I thought it would be interesting to have one like that on of my boats...maybe another time:)
Any who...I have to polish a few more threaded inserts and I will be assembling them in the next few days. I should have them ready to ship this weekend or early next week.
Just wanted to keep everyone up to date!
Rob M
03-12-2015, 06:52 AM
They look great so far. Nice work.
Rob
Scott Pearson
03-14-2015, 10:47 AM
Ok. Knobs are all done and ready to ship! You can Paypal me at scottp@lgdonziclassic.com or send me a check. Make sure you let me know the style of knob (Prop or Lion & Dolphin) and your shipping address.
Thank you everyone!
Scott Pearson
165 Adelphia Road
Farmingdale, NJ 07727
Ed Donnelly
03-14-2015, 01:14 PM
Hurry and make a new batch. I want one for the coffee table beside my coasters..Ed
Scott Pearson
03-15-2015, 01:13 PM
Just a few getting ready to be boxed up! Going in the mail Monday!
Bigbroadjumper
03-16-2015, 07:39 AM
Hello Scott,
I would like to get on the list for a "propeller"
knob.
Thanks,
When is the next set of knobs able to be ordered?
Scott Pearson
03-19-2015, 06:00 AM
Gerk, Bob,
I might have two if Bert does not want the two he asked for. I haven't heard from him or received payment.
Bert....Are you still in or are you out?
Ed Donnelly
03-19-2015, 06:06 AM
Dibs on the prop..Ed
bertsboat
03-19-2015, 01:27 PM
Sorry for the delay Scott. Payment sent.
Thanks
one of each.
Bert
tiupc
03-19-2015, 01:35 PM
Received mine today in the mail . Absolutely gorgeous. I'll just have to wait until mid may to install when I get the boat out of hibernation
Thanks Scott
Trevor
Scott Pearson
03-19-2015, 04:26 PM
Bert,
Thank you, Not a problem. I sent you an email also. Just need your shipping address again.
Scott Pearson
03-19-2015, 04:27 PM
Received mine today in the mail . Absolutely gorgeous. I'll just have to wait until mid may to install when I get the boat out of hibernation
Thanks Scott
Trevor
Trevor,
Great! Glad you like it. Thank you again!
Carl C
03-20-2015, 07:13 AM
So, did the older Donzis have a separate shifter that these fit on? Those are really cool and I'm trying to think of what I could do with one if another batch comes available! I'd like to display it in my home office somehow. What is the finish? I found out the hard way that polyurethane will fail in sunlight when I used it on a picnic table.
Rob M
03-20-2015, 10:53 AM
I'm trying to think of what I could do with one if another batch comes available! I'd like to display it in my home office somehow.
Would make a nice draft fridge pull handle...not sure if you keep a draft fridge in your home office:beer:
Scott Pearson
03-20-2015, 12:07 PM
So, did the older Donzis have a separate shifter that these fit on? Those are really cool and I'm trying to think of what I could do with one if another batch comes available! I'd like to display it in my home office somehow. What is the finish? I found out the hard way that polyurethane will fail in sunlight when I used it on a picnic table.
Yes the shifters are the Morse style shifters. The finish is a two part Polyurethane. They hold up great in the sun and have a lot of UV screeners in this particular clear coat. Also walnut is not an oily wood like teak so its not an issue.
Carl C
03-20-2015, 12:10 PM
Yes the shifters are the Morse style shifters. The finish is a two part Polyurethane. They hold up great in the sun and have a lot of UV screeners in this particular clear coat. Also walnut is not an oily wood like teak so its not an issue.
Thanks. I know you have enough experience to know what to use. I'll most likely order one if a new batch is in the future. :)
Scott Pearson
03-24-2015, 05:55 AM
Ed, Gerk, Big Bob,
I have not received payment from two people who wanted knobs. I have two left! The first two who let me know here that they want them....there yours.
Thanks!
Carl C
03-24-2015, 06:23 AM
I expressed an interest but I have to hold off on things right now until I find out how good my tax attorney is!!
Rob M
03-24-2015, 07:34 AM
Scott,
Just checking that you got my last PM and PayPal from a few days ago.
Thx
Rob
Scott Pearson
03-24-2015, 08:10 AM
Rob, I sent you a PM. Never got payment.
Rob M
03-24-2015, 09:09 AM
Hi Scott,
Can you check your PM and Paypal account? Payment is cued up from a few days ago, so it should be ready to claim. Let me know if it is not processing for some reason.
Thanks
Rob
Ed Donnelly
03-24-2015, 10:05 AM
I will wait for RobM and you to figure it out but that still leaves one other person . If it's the prop I will take it..Hell if it's the other I will take it..Ed
Ed Donnelly
03-24-2015, 10:24 AM
Scott; Looks like it is time for a new batch of coasters and mugs...Ed
I am still interested, but digging around all the excess stuff that came with my barrelback, I found the original.
It is pretty dried up, but possibly salvageable. I may need to wait for next batch if there is one.
Scott Pearson
03-24-2015, 01:59 PM
Rob, nothing in PayPal at all. Did you send it to scottp@lgdonziclassic.com?
Rob M
03-24-2015, 03:31 PM
Hi Scott,
Looks like I miss typed the email (forgot the P). Apologies, I will cancel that one and re-submit.
Rob
Scott Pearson
03-24-2015, 05:08 PM
Rob,
Got it this time thank you! I will ship out this week. Most likely on Friday.
So I have one more knob.....Ed you want it? It can be a prop or lion and dolphin.
Ed Donnelly
03-24-2015, 05:20 PM
Lion and Dolphin please Will do Paypal....Ed
Ed Donnelly
03-24-2015, 05:47 PM
Lion and Dolphin please Will do Paypal....Ed
Paypal sent I used my US Mastercard...ED
You sent $120.00 USD to Lake George Donzi Classic Club LLC
Rob M
03-24-2015, 07:43 PM
Thanks Scott.
Scott Pearson
03-25-2015, 06:27 AM
Ok guys...Thank you! I will ship out knobs on Friday. Please let me know when you get them!
Scott Pearson
03-25-2015, 05:32 PM
Ok everyone...I will be making another run of knobs in the next week. I have had a bunch of people who emailed me wanting one who didn't let me know before. So at this time I will be making 8 more. If anyone wants one please let me know so I can add them to the list.
Thank you!
Ed Donnelly
04-02-2015, 04:44 PM
Found a lion and a dolphin waiting for me at my front door........Ed
Scott Pearson
04-03-2015, 06:13 AM
Ed,
Glad you got them! Enjoy!
Rob M
04-03-2015, 07:39 AM
Received mine also - thanks Scott.
Bigbroadjumper
04-13-2015, 02:15 PM
Ok everyone...I will be making another run of knobs in the next week. I have had a bunch of people who emailed me wanting one who didn't let me know before. So at this time I will be making 8 more. If anyone wants one please let me know so I can add them to the list.
Thank you!
I'm still interested.
G Lex
03-29-2023, 02:25 PM
Anyone?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.