PDA

View Full Version : Volvo parts



murfman
10-02-2014, 06:26 PM
I have a Bell Housing / PDS housing for a Volvo AQ series outdrive and a Chevy SB/BB bolt pattern. It is from a fresh water boat, with no corrosion anywhere. It has been bead blasted, and is ready for paint and or powder coating. The shaft is perfect no wear on the splines etc.. I am including a set of brand new SKF brand bearings and seals (USA Made!!) 375 shipped to the lower 48

Also have a "Y" pipe from a 290/SP/DP outdrive also fresh water only 150 shipped to the lower 48

http://i184.photobucket.com/albums/x205/murfman_photo/misc/image_zps394c3f67.jpg (http://s184.photobucket.com/user/murfman_photo/media/misc/image_zps394c3f67.jpg.html)

http://i184.photobucket.com/albums/x205/murfman_photo/misc/image_zps9ed36960.jpg (http://s184.photobucket.com/user/murfman_photo/media/misc/image_zps9ed36960.jpg.html)

http://i184.photobucket.com/albums/x205/murfman_photo/misc/image_zps67b6c4b4.jpg (http://s184.photobucket.com/user/murfman_photo/media/misc/image_zps67b6c4b4.jpg.html)

http://i184.photobucket.com/albums/x205/murfman_photo/misc/image_zps80624f30.jpg (http://s184.photobucket.com/user/murfman_photo/media/misc/image_zps80624f30.jpg.html)

http://i184.photobucket.com/albums/x205/murfman_photo/misc/image_zpsb37f2b10.jpg (http://s184.photobucket.com/user/murfman_photo/media/misc/image_zpsb37f2b10.jpg.html)

http://i184.photobucket.com/albums/x205/murfman_photo/misc/image_zps4a7f30af.jpg (http://s184.photobucket.com/user/murfman_photo/media/misc/image_zps4a7f30af.jpg.html)

murfman
10-02-2014, 06:32 PM
I'll also throw in a fine spline yoke in case you are doing an engine swap on an older coarse spline outdrive.:)