PDA

View Full Version : crank sensor



Fishermanjm
07-07-2014, 09:28 PM
where is the crank sensor located on my 6.2L MPI ???

Carbo
07-07-2014, 09:43 PM
Mounts into the plastic timing chain cover on the front of the motor. It is held in place by a 5/16 bolt. There is a wire harnesss that clips into it.

https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcTw6IKnfAUD2um33DcxsWbv8z2hBVqHt QmKDX54V5YJ57lDOX2U

Fishermanjm
07-07-2014, 10:10 PM
thanks, it looks like i will have to move the fuel filter to get at it

Carbo
07-07-2014, 10:41 PM
shouldn't have to, usually you can reach up under the front. Tough spot but you can get to it

Fishermanjm
07-09-2014, 07:45 PM
soo my engine was an early production engine and of course it does not have a crank sensor like you guys thought, just the sensor in the distributor,,, i called mercruiser and was told this info, also was told about a TSB for stalling issues. i replaced the sensor and found the wires under the unit were burnt. soo i think i found my stalling issue. Thanks for the help people