View Full Version : Deck Removal-16' Donzi outboard
JBmarine
12-31-2013, 01:02 AM
I've done searches on the net and this forum looking for information....I have read that the deck is (typical Donzi) tabbed to stringers and a 16 IO is supposedly easy with engine compartment access....does anyone know if the outboard well is also tabbed (and if so, how was it accessed...little hatches are just that little)? Anyone who has R&R'd a deck, how did you rejoin the hull deck joint at gunwale? And, if anyone has any other pertinent info, it would be greatly appreciated. Thanks!!.......JB
BUIZILLA
12-31-2013, 08:10 AM
what year hull?
mattyboy
12-31-2013, 10:20 AM
usually there are a tabs around the floor locker and the ski locker. both areas where you can get to when the deck is on the hull.
JBmarine
12-31-2013, 02:55 PM
what year hull?
It is late 60's hull (1968+ but does not have molded-in HIN on transom) and motor is an early 70's merc 1150.
Thanks to all for information!!
BUIZILLA
12-31-2013, 06:27 PM
if you can email me some pic's of the hull, i'll send you some back of what I did to remove my deck... pretty simple
late 60's outboard 16?
Ed Donnelly
12-31-2013, 07:57 PM
if you can email me some pic's of the hull, i'll send you some back of what I did to remove my deck... pretty simple
late 60's outboard 16?
AHHH I see see the wheels turning...Ed
mattyboy
01-01-2014, 01:14 PM
once you find and cut the tabs about 6 people can pop the deck and walk it off
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.