PDA

View Full Version : St. Trop upholstery



MOP
11-05-2013, 04:49 PM
Posted for David Hartmann off the Org board.

IF any has or knows anyone with a St Tropez. This is a great opportunity. I had this made for the boat in 2008. It is in very good condition. The pleats are real sewn together 2.5 inch panels. It is a high grade vinyl. The foam is high density closed cell foam. This is the very best marine cushion you can buy. This was all custom maid and the pleats are extremely time consuming. I paid $3600 for the upholstery I will take the best offer. I will not be using the cushions anymore I have a new boat.


The standard components are
Bow seat base
Bow seat back
Center console base
Center console back
Engine Hatch cover

In addition to these pieces I also made three more cushions
Port cooler cushion (fits on igloo marine 54qt cooler next to engine hatch)
Starbord cooler cushion (fits on igloo marine 54qt cooler next to engine hatch)
Drivers cushion (fits on an igloo 25qt cooler right in front of the engine hatch)

I would like to get a few hundred dollars for everything. Even if you are just going to use the foam it is a great deal. The challenge is to get this to someone that can use it. I am asking for you help to repost this in other places so that it does not go to the trash pile.

Please call the shop at 860 516 3141 or my cell at 860 944 1210 David Hartmann or davidh@hornetmarine.com

http://www.flickr.com/photos/44760394@N03/10598143046/
http://www.donzi.org/forum/attachment.php?attachmentid=11404&d=1383256854