PDA

View Full Version : 2013 spread sheet



joseph m. hahnl
11-02-2013, 09:23 AM
we should start an annual stat sheet, This will develop a history of our boats. It kind of went by the way side when a certain members joined the paratroopers



http://ts2.mm.bing.net/th?id=H.5064776931868809&pid=1.7



Here is the old format, It was used for compiling into spread sheet


Model:
LOA:
MPH @RPM:
Member Name:
Location:
Boat Name:
Nbr engines:
Displacement:
HP:
Drive (s)
Drive Ratio:
Prop (s)
Pitch:
Comments:

Notes:

joseph m. hahnl
11-02-2013, 09:26 AM
Model: Minx
Year: 1988
LOA: 20'11"
MPH @RPM: 70mph@4600rpm
Member Name: joseph m. hahnl
Location: "Live free or die" NH
Boat Name: Rooster Tail
Nbr engines: 1
Displacement: 400
HP: (est) 390
Drive (s) type: Alpha One
Drive Ratio: 1:5
Prop (s) types: Mirage SS 3 blade
Pitch: 25 (A41)
Comments:
Upgrades for 2013 Dart 400 cid SHP block, all forged alloy internals, Mirage 25P (A41) Edelbrock 750
Notes:
Full roller, aluminum heads , stock wet exhaust with Dapars and Gibson Tips , Mph is Pitot , HP is estimated ( Based apon known 270 hp of 350 mag and 30 hp for every 200 rpm increase)

Carl C
11-02-2013, 10:29 AM
Some people seem to want to keep secrets. Sometimes for insurance reasons. I'd also suggest having an everyday speed and a best speed. Sooo:

Model: 22C
Year: 2005
Length: 22' 6"
MPH: Best GPS 85.8 on limiter at 5,400. Everyday 83 @ 5,200 ish.
Name: Carl C ;)
Location: Suburban Detroit (Clarkston)
Boat name: None, "little yellow donzi" for VHF purposes.
Engine:1
Displacement: 502 CID
HP: 540 (rated 525)
Drive: Bravo XR upper, Imco -2" shorty lower
Ratio: 1.5
Prop: BBlades Bravo 1 30p
Comments: HP 525 EFI, Custom opened up under bow for storage and sleeping. Aluminum fairing from factory. Zeiger full dual ram steering, Lots of little cool things.

Whew, I can't see many people doing this!!!!

woobs
11-02-2013, 03:47 PM
Model: 16 Ski Sporter
Year: 1969
LOA: 16' 7"
Colour: Blue
MPH @ RPM : Unknown
Name: Sean Conroy
Location: Newmarket, Ontario, Canada (Greater Toronto Area)
Boat Name: TBA
Nbr Engine(s): One
Displacement: TBA
HP @ RPM: TBA
Torque @ RPM: TBA
Drive(s): TBA
Ratio: TBA
Prop: TBA
Pitch: TBA
Status: Project - deck off restoration
Comments: Purchased as incomplete "work in progress" October, 2013
Notes:

mc donzi
11-04-2013, 08:12 AM
Model: 16 Ski Sporter
Year: 1969
LOA: 16' 7"
Colour: Blue
MPH @ RPM : Unknown
Name: Sean Conroy
Location: Newmarket, Ontario, Canada (Greater Toronto Area)
Boat Name: TBA
Nbr Engine(s): One
Displacement: TBA
HP @ RPM: TBA
Torque @ RPM: TBA
Drive(s): TBA
Ratio: TBA
Prop: TBA
Pitch: TBA
Status: Project - deck off restoration
Comments: Purchased as incomplete "work in progress" October, 2013
Notes:

Morning Woobs,


Does your blue 16 have the thru' hulls at the water line and spread wide apart.???

If so, its probably my old boat.

Dave McDonald.... Gravenhurst area.

woobs
11-04-2013, 08:43 AM
Hi Dave,

I don't think this is your old boat as I just purchased it from a forum member here (in Long Island N.Y.).

I have not even picked it up yet :)

Cheers,
Sean

Just Say N20
11-04-2013, 04:23 PM
Model: 1967 Ski-Sporter
LOA: 16' 7"
MPH @RPM: 65.2 @ 5,300 (so far)
Member Name: Just Say N2O, Bill
Location: Grand Rapids, MI
Boat Name: Samson
Nbr engines: 1
Displacement: 409
HP: 530+ Dyno
Drive (s) Volvo 290 w/trim
Drive Ratio: 1.61:1
Prop (s) Solas Titan
Pitch: 23
Comments: C16-409, built April 1967. I did a 3+ year deck off Resto-modification. Only things original on the 1967 boat, besides the hull and deck are the clam-shell vents, and lifting rings.

Notes: Custom Keith Eickert built 409. Started life in 1972 in a Caprice, 202 double hump heads that started life in a 1972 Camero. Keith worked his magic and built a 430 hp @ 5,300, 490 ft lbs @ 4,300 awesome engine, topped of with CMI Headers.

mattyboy
11-04-2013, 05:04 PM
new boat new thread

Model: 1968 Bench Seat Hornet
LOA: 19' 2 1/2"
Beam 7' 10 1/2"
MPH @RPM: 50.4 @4900
Location: NY
Boat Name: N/A
Nbr engines: single Ford
Displacement: 5.0 with 351W firing order
HP: 240 ish
Drive (s) 280T
Drive Ratio: 1.61
Prop (s) Titan
Pitch: 19

Comments: http://www.lgdonziclassic.com/pdfs/mveth.pdf

Notes: http://www.lgdonziclassic.com/pdfs/302refurb.pdf

CHACHI
11-05-2013, 06:06 AM
Model: 22C 1999
LOA: 22
MPH @RPM: 74 @ 5050
Member Name: Ken Ciocci
Location: St. Lawrence River NY (boat)
Boat Name:
Nbr engines: 1
Displacement: 454
HP: 385
Drive (s) Bravo with a -2 shorty
Drive Ratio: 1.5
Prop (s) Bravo 4 blade
Pitch: 28 "labbed by BBlades"
Comments:EMI exhaust

Notes:

Indyblackhawk
11-05-2013, 05:17 PM
Model: 2008/13 43ZR
LOA: 42' 10"
MPH @RPM: 120MPH @ 5450
Member Name: Indyblackhawk
Location: Indianapolis, IN / Punta Gorda, FL
Boat Name: Entourage
Nbr engines: 3
Displacement: 8.2L (Mercury Racing HP700SCi)
HP: 750 each
Drive (s): Mercury Racing NXT
Drive Ratio: 1.50:1
Prop (s): Mercury Racing Cleaver
Pitch: 17 x 38
Comments: Engines rebuilt by Cobra Power, all 3 dynoed just shy of 750hp

RockyS18
11-07-2013, 10:39 AM
Model: 2009 22 Classic
LOA: 22' 6"
MPH @RPM: 86mph @ 5600
Member Name: RockyS18
Location: Lake George, NY
Boat Name: Radical 2
Nbr engines: 1
Displacement: 8.7L
HP: 565
Drive: Bravo XR
Drive Ratio: 1.50
Prop: labbed Bravo 4 blade
Pitch: 28p
Comments: Mercury 565 installed this past winter, also installed 280 K-planes, and lots of little mods. Needs more prop, goal is 90mph.