PDA

View Full Version : SOLD -Mercruiser Alpha One Gen 2 by SE Engineering



ACE51
04-14-2013, 09:05 AM
SE Engineering SE116 which is the same as a Mercruiser Alpha One Gen 2 (1991 Alpha-present) with Mercruiser stickers/graphics. Good working condition. No salt water use. Free local pickup in Winston Salem, NC (27106) or AOTH. 1.62 Gear ratio standard RH drive. Will ship with upper/lower separated at cost if needed. $675. New is $1,500 without driveshower/skeg.

Email me for best contact: aaronelsner@aol dot com.

75440
75441
75442
75443
75444

BUIZILLA
04-14-2013, 09:15 AM
I am VERY interested.... why the skeg guard? how many hours?

ACE51
04-14-2013, 08:46 PM
I am VERY interested.... why the skeg guard? how many hours?

This unit came on the 16 when I bought it, I believe it has ~75-100 hours on it (might be less). GOLDNROD replaced the factory Mercruiser unit (not sure if that one blew up or if he hit something) with this one and added the skeg guard and drive shower.

BUIZILLA
04-14-2013, 09:02 PM
if the skeg is intact under the guard I'll take it.

thanx

ACE51
04-15-2013, 07:34 AM
7552375524

If you know a way I could remove these one way flat head screws I would remove the skeg! Also attached is a picture of the bottom drain plug as removed this AM, not much crud on it.

BUIZILLA
04-15-2013, 08:01 AM
the last one I took off I had to use a 3/16 wide blade cold chisel against the screw ramp and they came right out...

biggiefl
04-15-2013, 10:19 AM
WHy not just leave it on, aint worth anything used.

ACE51
04-17-2013, 08:21 AM
I tried with a BFSD with no luck of removing those screws, even if you take off the skeg there will still be the two holes from the screws. I supposed you could PM goldnrod and ask him why he put it on? I think it looks cool. Let me know if you want it!

BUIZILLA
04-17-2013, 08:39 AM
i'll take it, PM me please

gold-n-rod
04-25-2013, 09:05 AM
The skeg is intact. I put the guard on it when the drive was new.

Randy

BUIZILLA
04-25-2013, 09:33 AM
good to hear that...

this is a spare for my deckboat... anxious to try the 1.65 ratio on my Blender Barge...

the last excursion thru the Dora Canal in my 16 just cost me $952 in repairs on the TRP Yammi...

ACE51
06-11-2013, 08:37 AM
cleaning up all my FS adds, this one is also ​sold