PDA

View Full Version : Wanted! Holman-Moody water pump drive plate



MR MAGOO
08-01-2012, 08:41 AM
I'm desperately looking for a Holman-Moody crank mounted, sea water pump drive plate for a 351 Ford. Hopefully someone has one laying around.

It's for a buddys old 16 Donzi,very limited room in front of engine for reconfiguring to a different pump.

Thanks,

Kurt 715-410-0735

mattyboy
08-01-2012, 09:06 AM
i'll keep an eye out for one

it might pay off to contact Holman Moody they might have one gathering dust
http://www.holmanmoody.com/contact.html

MR MAGOO
08-01-2012, 09:20 AM
Yes, I spoke with Lee Holman on Monday. Very nice guy, told me the coupling is a standard Lovejoy component but the plate is NLA.

mattyboy
08-01-2012, 03:57 PM
maybe try these guys they might have something that will work, after all it is a jabsco setup


http://www.depcopump.com/itemlist3.htm

MR MAGOO
08-01-2012, 04:43 PM
Thanks Matty

Gary S
08-01-2012, 07:07 PM
Am I right in thinking that both parts,the crank drive and the pump drive broke? Did the pump seize? My pump drive side was destroyed when the PO left the key get loose ruinning the pump shaft too.I took what I had left to a machine shop and he cut down a lovejoy coupler to fit. Hard to see in first picture here. If you cannot find the HM parts you could do the same that I had done to the pump side and on the crank side machine down another half of a coupler to size, thickness wise and weld it to a plate that matches the crank side part that self destructed. I used a steel one but they come in aluminium and stainless too.I actually got mine at a farm store that had them all in stock . It also looks to me that it was run without a spider,make sure you get a new one of those too.


72469

72470

72471

72472