PDA

View Full Version : Need mesurements



thatgirl
04-25-2012, 07:52 AM
:italy: CAN ANYONE TEL ME THE WIDTH OF BOOT STRIPE ON A 18 2+3 AND THE DISTANCE OF THE BOTTOM OF BOOT STRIPE TO THE CHINE FOR A TWO TONE BOAT.I AM REPAINT MINE AND FORGOT TO TAKE MEASUREMENTS THANK YOU FOR ANY HELP

bobwpe
04-25-2012, 12:43 PM
Hi thatgirl,
When I looked into this for my project I found that the thickness of the stripe varied from 2" for the early boats to 1 1/8" for the more recent ones. After much thought and rumination I ended up going with 1 1/2" tapering to 3/8" at the bow spaced 1/2" up from the chine. Whether to taper it or not is a matter of personal preference.
Hope this helps.
Bob

thatgirl
04-28-2012, 09:06 PM
[ QUOTE=$originalposter]{$pagetext}[/QUOTE] thank you