View Full Version : Wanted - OMC King Cobra 4 blade props, 23-26p

04-19-2012, 10:54 PM
Re-power is complete and I need to trash my 21p 3 blade before my fuel budget is blown for the entire season :nilly:

...but seriously, it's like being stuck in 3rd gear in a car or something - I need to put some load on this engine and see what she can do.

Ideal prop is deemed to be a 15.25" dia 4 blade 24p, but considering what I'm working with.. I'm open to offers! I might not see your PM so shoot me an email at alex (at) athomasphoto.com

04-20-2012, 07:31 AM
I know I have a 15.25x25 TXP... need to check what hub it is though...

I also have a 14.5x29 Fusion..

05-29-2012, 12:45 AM
I have 1 adapter I'm not using also. Did you Dyno the motors?? The BBF in my 1990 Blackwidow is now 514 HP and I have a 24 pitch on it. It maxed 514 HP on the Dyno at 5200 rpm so thats what my prop guy dialed the prop to with a 5400 rev limiter on the MSD. Runs like I'm being chased by the cops, 73mph on a handheld GPS. I can ask him exactly what he did to it if you have the Dyno numbers. The prop I have fits the OMC splines.