Roadrunner
04-09-2012, 01:48 PM
Hi all
I'm in the process of repowering my 2003 22C. I made a mistake of pulling the engine without out taking some measurements first. I'm hoping someone that has a 496 or 500/525efi boat around that year might be nice enough to meause the distance from the exhaust high point to the hatch. Even better would be the crankshaft center line to the hatch. My boat is already at the fiberglass shop geting structural upgrades including new transom. I'm tring to decide if there is room to raise the x-dimension without modifying the hatch.
Thanks
Greg
I'm in the process of repowering my 2003 22C. I made a mistake of pulling the engine without out taking some measurements first. I'm hoping someone that has a 496 or 500/525efi boat around that year might be nice enough to meause the distance from the exhaust high point to the hatch. Even better would be the crankshaft center line to the hatch. My boat is already at the fiberglass shop geting structural upgrades including new transom. I'm tring to decide if there is room to raise the x-dimension without modifying the hatch.
Thanks
Greg