gcarter
01-29-2012, 08:47 PM
I bought this system about four years ago. It had come out of a 22C whose owner was converting to headers.
I got all the hardware and almost all the wiring harness. The power for the assembly comes from the starter solenoid and terminates in a 20 Amp,or so, relay and circuit breaker.
There's a single wire that connects to an "On" "Off" switch mounted on the dash. What I don't know is, is the wire to the dash mounted switch a ground that activates the relay when when the switch is "On".
Or, is power taken from the dash, and w/a fuse in line, through the "On" "Off" switch to the relay?
I really need to know and appreciate a correct answer.
I got all the hardware and almost all the wiring harness. The power for the assembly comes from the starter solenoid and terminates in a 20 Amp,or so, relay and circuit breaker.
There's a single wire that connects to an "On" "Off" switch mounted on the dash. What I don't know is, is the wire to the dash mounted switch a ground that activates the relay when when the switch is "On".
Or, is power taken from the dash, and w/a fuse in line, through the "On" "Off" switch to the relay?
I really need to know and appreciate a correct answer.