silverghost
12-04-2011, 07:03 PM
Wanted: 1960s-1970s
Donzi 18'/16' Bow & Stern ORIGINAL old navigation light assemblys for my 1972 "Benchseat 18" restoration project.
These should be plated brass , or bronze ~
not zinc or pot-metal.
I also need lifting rings & their trim ring bezel bases.
I'm sure there is some old removed take-off hardware out there somewhere ?
Poor plating OK.
I will have them re-plated if necessary.
Just want to keep this boat as period correct as possible.
Thank's
Brad Hunter
1 215 947 4676 (Home landline)
1 215 479 6667 (Cellphone)
silverghost1926@msn.com
Donzi 18'/16' Bow & Stern ORIGINAL old navigation light assemblys for my 1972 "Benchseat 18" restoration project.
These should be plated brass , or bronze ~
not zinc or pot-metal.
I also need lifting rings & their trim ring bezel bases.
I'm sure there is some old removed take-off hardware out there somewhere ?
Poor plating OK.
I will have them re-plated if necessary.
Just want to keep this boat as period correct as possible.
Thank's
Brad Hunter
1 215 947 4676 (Home landline)
1 215 479 6667 (Cellphone)
silverghost1926@msn.com