PDA

View Full Version : livorsi shifter



smokediver
11-20-2011, 05:41 PM
I have a side mount livorsi shifter . the trim switch in the handle isnt working anymore . Any ideas on replacing the switch ? livorsi doesnt have it listed in their catalogue ..

MOP
11-20-2011, 09:52 PM
[ QUOTE=$originalposter]{$pagetext}[/QUOTE]

Post a pic, some of if not all were made by Uflex.

Phil

roadtrip se
11-21-2011, 11:20 AM
Mop is right, my Livorsi stick has UFlex guts. I looked at both, before going with the Livorsi unit. Call Todd Z at Livorsi, as he is great to work with, and can probably get you the part.

smokediver
11-21-2011, 09:21 PM
Thanks guys . I looked at a Uflex switch and it looks identical . I ordered a diode kit from dana marine and my plan is to put a rocker switch in the dash for the trim and use the trim switch with the diodes to operate the k-planes .. I really only use the trim going to and from the boat ramp for the most part ..

gcarter
11-22-2011, 02:26 PM
I finally got arund to reading this thread.
The switch is a British built product. It is an Eledis 3A.
It seems to be distributed world wide by C&K, where it is called a 7000 Rocker switch. There seems to be dealers everywhere.

http://www.ck-components.com/7000/rocker,10497,en.html

smokediver
11-22-2011, 08:51 PM
Great find George ! I was looking around and its under 10 bucks !