PDA

View Full Version : 21' hornet



downunder
09-09-2011, 06:26 AM
Hello All,My first post here after viewing for a little while;i have bought a hornet III and need a trailer made for it and trailer manufacturer needs hull angles etc,which is something that i dont have as boat is still in transit to me here in Australia.If a member could could give me a hull diagram with deadrise etc then many thanks.My thoughts are of your great nation,please continue to stand tall.Thank you.

gcarter
09-10-2011, 11:03 AM
Welcome to the forum.
I've often thought about visiting your nation.
Maybe someday.......
I've no experience w/Hornets, but I "think" the hull deadrise is about 19*.
Someone here knows.
If you set up the trailer w/"on-edge" bunks, I'd imagine it'd be hard to wrong.

Good luck w/your new Donzi.

mattyboy
09-14-2011, 10:17 AM
The Hornet II and III were a bit of a re-work from the original hornet hull.

I believe they have a slightly steeper deadrise and different bottom .

the original hornet was a 19 degree deadrise with a slight hook and very short inner strakes on a beam of 7'10 and 1/2".Very much like the 16 bottom

when they re-worked the Hornet II and III hulls besides adding some length and narrowing the beam by a 1/2 inch . They increased the deadrise to 22 degrees and lengthened the inner strakes. very much like the 18 and 22 bottom(I have not personally verified this , this is what I have been told)



this is what I have on the hornet III


LOA 21'0"
Beam 7'10"
draft to keel 12"
draft to outdrive 27"
gross weight 3150 lbs
fuel capacity 42 gallons

downunder
09-15-2011, 05:34 AM
Thanks for your info fellas,.....just cant wait to get the boat home and go for a blast.

tmh
09-15-2011, 07:18 AM
Any pictures?