PDA

View Full Version : 270 leg with Hyd trim



donzidan007
07-15-2011, 11:10 PM
Has anyone retro fitted a 270 leg with hydraulic trim

MOP
07-16-2011, 06:12 AM
There were several types, you can keep an eye out on Ebay they do turn up. There were several types, the single piston unit that was in the base of the transom shield which pushed on the mid section, the elephant ears the bulky setup and the later with the rams low inside the shield nice and clean. The elephant ears can be adapted to most any drive, the others are transom shield setups requiring a full shield swap.