View Full Version : 22C stock prop?
handfulz28
07-11-2011, 10:28 AM
1994 w/Merc 330 Bravo? Does a 21p Mirage sound right? Should we expect 4800rpm out of that?
What if the motor was supposedly rebuilt with large rects, high-rise manifold, Holley 750 and Comp Cams marine cam?
I'd expect that engine to be at least as strong as a 454MAG, and be able to turn that 21p past 5000rpm right?
So if somebody just threw a Holley and "maybe" a cam on a 330, we'd probably see around 5000rpm with a 21p?
BUIZILLA
07-11-2011, 11:06 AM
23 fer sure
handfulz28
07-11-2011, 11:22 AM
23 with the 330, or with the supposed mods?
I saw 21p on the prop, and barely 5k on the tach...sumthin' ain't right. :)
BUIZILLA
07-11-2011, 12:31 PM
1994 w/Merc 330 Bravo? Does a 21p Mirage sound right? Should we expect 4800rpm out of that?
What if the motor was supposedly rebuilt with large rects, high-rise manifold, Holley 750 and Comp Cams marine cam?
I'd expect that engine to be at least as strong as a 454MAG, and be able to turn that 21p past 5000rpm right?
So if somebody just threw a Holley and "maybe" a cam on a 330, we'd probably see around 5000rpm with a 21p? my 330 with a cam turned 4800 using a TRS which sucks power like Brittany Spears... a strong 385 would need at least a 24 using a Bravo, a 415/425 uses a 25 with a Bravo
IOW, you ain't got a 385, more like a 285
Donzi_Dude
07-11-2011, 04:50 PM
i ran a 25 with a stock 330.
:wink:
maybe its been repitched?
invest in a gps.
BUIZILLA
07-11-2011, 05:10 PM
i ran a 25 with a stock 330.
you must have quite a collection of shovels.. :popcorn:
Donzi_Dude
07-11-2011, 05:13 PM
you must have quite a collection of shovels.. :popcorn:
not so much.
I am making about 370+hp and swing a 23 4B turning 5K and 65.5, try to borrow a 23 3B for starting point. Pretty sure the stock wheel for a 330 22 was a 21. Phil
Donzi_Dude
07-11-2011, 07:55 PM
Pretty sure the stock wheel for a 330 22 was a 21. Phil
i dont know about that but your MOP so...
:wink:
IF thats the case and this guy is spinning it to 5K hes got something going on.
poorboy
07-12-2011, 09:39 PM
I had the same motor in my 96 22C. gen 6, flat top pistons, roller mag cam, rectangle port alum intake (merc ) retangle port 454/502 iron heads. It turned a stock cast hub 23 P mirage 4600 and pushed the boat 66 mph. You may see 4800 or tad more with the 21 P mirage. The 23 P mirage will give you a higher cruise mph. The 23 P mirage was the stock prop for the 22C with the 7.4 mag motor.
blackhawk
07-13-2011, 01:47 PM
As stated invest in a GPS as your tach could be off. Get accurate speed numbers then you can do the math.
handfulz28
07-13-2011, 05:28 PM
Somebody else bought the boat. Thanks for the input.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.