View Full Version : Inline oil cooler
joseph m. hahnl
05-01-2011, 05:31 AM
I decided I want to put in an oil cooler in the Minx.
I want to confirm that it is best to loop in after the satellite oil filter.
Joe the cooler is the first thing to get cold water, should be right after the pump.
Phil
maddad
05-01-2011, 09:17 AM
On my setup, the oil leaves the block and gets filtered first(and it's temp read), then cooled and sent to the motor. I do it that way because the hot oil filters better and after the pumping it's as hot as it's going to get.
joseph m. hahnl
05-01-2011, 06:56 PM
Thanks Phil: oil cooler first on water side.
Thanks MD, Oil cooled after filter.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.