PDA

View Full Version : Dual Pistons Trim tab popped the hose question.



Selenium
04-24-2011, 01:15 AM
So it was 65 out and I took my 22 Classic out. On the Passenger by the hydaulic pump for the trim the line that come in before it T off popped off the brass fitting. My question is can I fixed this?

1. Fix the Brass fitting so that it will hold the plastic hose?
2. Can I refill the hydraulic fluid back easily?
3. I need to be concern about flushing out the air in the hose?

or just leave it to the pro?

450rrrr
04-24-2011, 06:47 PM
if its a bennett.then remake the connection to the t.fill your resvior.and cycle the tabs up and down.they will self blead.you can go to bennetts site and they have full instruction on filling and bleading..