22 classic theft recovery/project

[MDonziM]

There is a 22c in the swap shop section of OSO. I know nothing about it.

[maddad]

Thank God I don't need another project.
http://www.offshoreonly.com/forums/swap-shop/251126-22-donzi-classic-hull-only.html

[CaribouLou]

http://cgi.ebay.com/ebaymotors/1994-DONZI-22-CLASSIC-PROJECT-BOAT-/120709473721?pt=Power_Motorboats&hash=item1c1ad865b9#ht_500wt_975


15k with a procharged 496 and a bravo....

[mrfixxall]

Theft Recovery,good Solid Hull,has A Lot Of Minor Chips And Scratchs.cut For A Bravo/bigblock.clean Florida Title.would Consider Trades.$5000.315 414 9456
Attached Thumbnailshttp://www.offshoreonly.com/forums/attachments/swap-shop/445182d1302473609t-22-donzi-classic-hull-only-donzi.jpg (http://www.offshoreonly.com/forums/attachments/swap-shop/445182d1302473609-22-donzi-classic-hull-only-donzi.jpg) http://www.offshoreonly.com/forums/attachments/swap-shop/445183d1302473609t-22-donzi-classic-hull-only-donzi-001.jpg (http://www.offshoreonly.com/forums/attachments/swap-shop/445183d1302473609-22-donzi-classic-hull-only-donzi-001.jpg) http://www.offshoreonly.com/forums/attachments/swap-shop/445184d1302473609t-22-donzi-classic-hull-only-donzi-002.jpg (http://www.offshoreonly.com/forums/attachments/swap-shop/445184d1302473609-22-donzi-classic-hull-only-donzi-002.jpg)

http://www.offshoreonly.com/forums/attachments/swap-shop/445185d1302473609t-22-donzi-classic-hull-only-donzi-004.jpg (http://www.offshoreonly.com/forums/attachments/swap-shop/445185d1302473609-22-donzi-classic-hull-only-donzi-004.jpg) http://www.offshoreonly.com/forums/attachments/swap-shop/445186d1302473609t-22-donzi-classic-hull-only-donzi-006.jpg (http://www.offshoreonly.com/forums/attachments/swap-shop/445186d1302473609-22-donzi-classic-hull-only-donzi-006.jpg)

looks like theirs no hatch..

[fasttrucker]

They stole it and cleaned it out for sure......

[Planetwarmer]

They would have smart to remove the windshield too! That stainless frame is worth some $$$!

Be on the lookout for some seats with blue piping for sale from some random guy.

[Greg Guimond]

Paging HIGH LIFE.........

Looks like a prime candidate for your OB conversion project :outtahere:

[hdsadey]

Ha looks like mine when I got it! The bastards even stole the hatch like mine, there's a grand at least Mine has the steering wheel though, apparently they didn't have a puller to get it off, they tried cause the flat lock nut was layin on the floor!

[roadtrip se]

I'm going to call it a 94 with the style of seat pedestals and the windshield taper. The shelves in the engine bay are not a 94 feature, so it could be a 95 or the shelves could have been added. The instrument cut-out also points to a 1994.

And everything is missing. Even with shopping the bargain basement spots, there is a lot more than $10K involved in taking this thing back to the water.
Hatch, $1K, Interior, $2.5K, Instruments $1K, Drive and Transom, $4-5K, and this is before we start talking about an engine, rigging, or fiberglass work.
Your in for $15-20K, if you do most of the work yourself, and that is about what this boat is worth fully rigged.

[fogducker III]

I'm going to call it a 94 with the style of seat pedestals and the windshield taper. The shelves in the engine bay are not a 94 feature, so it could be a 95 or the shelves could have been added. The instrument cut-out also points to a 1994.

And everything is missing. Even with shopping the bargain basement spots, there is a lot more than $10K involved in taking this thing back to the water.
Hatch, $1K, Interior, $2.5K, Instruments $1K, Drive and Transom, $4-5K, and this is before we start talking about an engine, rigging, or fiberglass work.
Your in for $15-20K, if you do most of the work yourself, and that is about what this boat is worth fully rigged.


+1

Then you need a trailer!!!! Not worth $5000 for a COMPLETELY bare hull...IMO

[BUIZILLA]

+1

Then you need a trailer!!!! Not worth $5000 for a COMPLETELY bare hull...IMO the bottom is pretty trashed as well... add coin to repair and paint

[CaribouLou]

http://cgi.ebay.com/ebaymotors/1994-DONZI-22-CLASSIC-PROJECT-BOAT-/120709473721?pt=Power_Motorboats&hash=item1c1ad865b9#ht_500wt_975
15k with a procharged 496 and a bravo....



Did ANYONE bother clicking on this link? its a '94, and they said they'll install the procharged 496/bravo combo for 10k. For 15k, I don't think its that bad of a deal at that point.

[fogducker III]

Did ANYONE bother clicking on this link? its a '94, and they said they'll install the procharged 496/bravo combo for 10k. For 15k, I don't think its that bad of a deal at that point.


They didn't mention adding the hatch, gauges, hardware, electrical, steering, trailer, fixing the "scratches" and damage to the hull etc in the 10K price though....?

For 20K you could buy a 1994 turn key 22 on a trailer....:yes:

http://www.powersportsnetwork.com/enthusiasts/pre_owned_detail.asp?PreOwnedVehicleCode=1814043

[gcarter]

When I bought the Minx, my first Donzi and trailable boat w/an outdrive, it was little more than this and I paid $4K for it.
I added a trailer, and everything else.
But $5K for a completeley bare hull, even one this new, may be a little high.

[CaribouLou]

They didn't mention adding the hatch, gauges, hardware, electrical, steering, trailer, fixing the "scratches" and damage to the hull etc in the 10K price though....?

For 20K you could buy a 1994 turn key 22 on a trailer....:yes:

http://www.powersportsnetwork.com/enthusiasts/pre_owned_detail.asp?PreOwnedVehicleCode=1814043


You don't need any of that stuff.

[fogducker III]

You don't need any of that stuff.


Point taken, an engine, drive and steering wheel in a hull works well....:yes::wink:

[roadtrip se]

And boy do those stubs that would serve as seats on the budget rehab do look comfy!

[DONZI]

the bottom is pretty trashed as well... add coin to repair and paint
Yup !:yes:
I was very interested in it when it was at Copart
.Logistics and timing killed it for me.

[mercsl55]

There is a 22c in the swap shop section of OSO. I know nothing about it. If you can find out some info mail it to me. I would maybe be interested in a project ccarman2121@aol.com Corey