PDA

View Full Version : Trim Indicator Cables - Z33


VancouverMark
03-14-2011, 06:50 PM
Hi Guys

I need a set of Trim Indicator Cables for my 1989 Z33 crossbow. They have been cut off by the previous owner. Anyone know where I can get these or the part # ? Is there anything that goes on the drives to fasten them there?
.
cheers
Mark
gcarter
03-14-2011, 07:41 PM
They're marked in the plastic sheathing on one of the ends.
Hopefully, the end you have!
Otherwise, you'll have to mock it up. They can be challenging to measure.
gcarter
03-14-2011, 07:43 PM
There're fittings that go on the trim cylinders. I've often seen them on eBay.
mrfixxall
03-14-2011, 08:29 PM
If you have kplanes this pic should give you a idea on how they mount up..pm donzigo, he may have the correct legnth measurement for the cables you need..fair warning,,watch out for the springs @ the indicator gauge.
VancouverMark
03-14-2011, 08:59 PM
If you have kplanes this pic should give you a idea on how they mount up..pm donzigo, he may have the correct legnth measurement for the cables you need..fair warning,,watch out for the springs @ the indicator gauge.

aaahhhhh.......I thought they hooked up to the Drives! I do have K Planes.
mrfixxall
03-15-2011, 12:20 AM
This is one is for a bravo,the cup bolts on to the end of the trim cylinder where the rear pin goes through the cylinders and the spring loaded tube clamps on the side of the trim cylinder..
VancouverMark
03-15-2011, 07:55 PM
This is one is for a bravo,the cup bolts on to the end of the trim cylinder where the rear pin goes through the cylinders and the spring loaded tube clamps on the side of the trim cylinder..

Thanks! Don't suppose you are selling those?
Mark
mrfixxall
03-15-2011, 09:33 PM
Thanks! Don't suppose you are selling those?
Mark
sorry! then i wouldnt have any for mine ;)

eddie marine sells them tho!

http://www.eddiemarine.com/store/cart.php?m=product_list&c=75
iznod33
03-15-2011, 11:17 PM
I,ve got a pair that I will sell you that will come with the "REST" of the boat. Then I won't have to start the transom project next week. :bonk:
The cables are standard 33c cables and I can give you the length on mine on Thursday if you want. Powder Day Tomorrow...Cheers!
VancouverMark
03-16-2011, 07:36 AM
I,ve got a pair that I will sell you that will come with the "REST" of the boat. Then I won't have to start the transom project next week. :bonk:
The cables are standard 33c cables and I can give you the length on mine on Thursday if you want. Powder Day Tomorrow...Cheers!

Hey thanks, that would be great. Mine is still shrink wrapped.Is yours the same boat as mine? 1989 Z33, bravo 1's 454/s? I would think they would be the same length if they are the same exact boats.
gcarter
03-16-2011, 12:41 PM
If nothing else, he can give you the numbers off them.
iznod33
03-17-2011, 05:32 PM
Hey thanks, that would be great. Mine is still shrink wrapped.Is yours the same boat as mine? 1989 Z33, bravo 1's 454/s? I would think they would be the same length if they are the same exact boats.
No. Mine is a '86 with TRS drives. Unfortunatly the nubers on my cables are worn off, but they extend 2'-11" past the stainless transom fitting (which is the same as yours) to the end of the cable. So if you mark your cables where they are now you can pull them from the boat and just measure them. The cables measure from tip to tip when you order them. Hope this helps and look forward to seeing you on the water this summer. We will be bringing the boat up for the fireworks this summer so maybe we can meet up. Craig