View Full Version : Volvo 280 steering tube bracket
pcmpete
03-07-2011, 12:58 PM
I am looking for a bracket that supports the steering tube. I would prefer the type that attaches to the transom shield bolts, the thru transom one will also work.
OR
a bracket that will support a Hydraulic Steering System
Thanks
mrfixxall
03-07-2011, 11:45 PM
I am looking for a bracket that supports the steering tube. I would prefer the type that attaches to the transom shield bolts, the thru transom one will also work.
OR
a bracket that will support a Hydraulic Steering System
Thanks
I think mr bill still has this forsale..
http://www.donzi.net/forums/showthread.php?t=62083
pcmpete
03-08-2011, 09:10 AM
I think mr bill still has this forsale..
http://www.donzi.net/forums/showthread.php?t=62083
Thanks for the link :)
maddad
03-08-2011, 08:43 PM
If you are still using a cable and have a straight tiller arm, I have this bracket that will mount on the port side stringer.
penbroke
03-09-2011, 08:55 AM
I think I have one of the angle iron type that uses the transom shield bolts for the cable steering.
There are photos in this thread (http://www.donzi.net/forums/showthread.php?t=53096&highlight=bracket). I'll look for it tonight...
Frank
pcmpete
03-10-2011, 10:23 AM
If you are still using a cable and have a straight tiller arm, I have this bracket that will mount on the port side stringer.
Thanks, it is actually for another boat, it has foam cored stringers, I don't think that would work.
pcmpete
03-10-2011, 10:24 AM
I think I have one of the angle iron type that uses the transom shield bolts for the cable steering.
There are photos in this thread (http://www.donzi.net/forums/showthread.php?t=53096&highlight=bracket). I'll look for it tonight...
Frank
Yeah, that is the type I am looking for. If you find it drop me a PM with a price and shipping to AZ 85331
Thanks
penbroke
03-10-2011, 11:18 AM
Yeah, that is the type I am looking for. If you find it drop me a PM with a price and shipping to AZ 85331
Thanks
OK, tonight I will actually look for it. Didn't quite get there last night...
Frank
penbroke
03-10-2011, 08:53 PM
Yeah, that is the type I am looking for. If you find it drop me a PM with a price and shipping to AZ 85331
Thanks
OK, tonight I will actually look for it. Didn't quite get there last night...
Frank
Found it! PM sent.
Frank
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.