gas cap

[DAULEY]

wanted gas cap for cig

[maddad]

Dauley, there's a marine salvage store near me that has all sorts of older pieces of hardware etc. Post a pic of what you're looking for and I'll go see what they have.

[DAULEY]

i dont have a picture i filled it with gas and drove off with it on the bow
it a crome thread on like all boats but threads are different than new one

[mrfixxall]

i dont have a picture i filled it with gas and drove off with it on the bow
it a crome thread on like all boats but threads are different than new one

Post a pic of the empty hole so i can mabe match ir up tp one of the old ones i have..

[DAULEY]

Post a pic of the empty hole so i can mabe match ir up tp one of the old ones i have..
ill do that this weekend has blue tape on it now back in storage
thanks bob

[maddad]

The older ones mostly had three screws and the later ones four. They have both types.

[DAULEY]

The older ones mostly had three screws and the later ones four. They have both types.
i will look im sure its old 1986 boat the one i picked up today the threads are different i think i need fine thread
thank you bob

[silverghost]

You need to fasten a brass chain inside your New gas-cap with machine screw tapped in the
cap's inside center & a spring-V shaped stiff wire locked in your gas tank's fill pipe to prevent a future cap loss !
Most gas fill deck fittings were built like this, or similar when first new !

[HIGH LIFE]

My MAGNUM'S all had flip up gas fills but were mounted on side decks, to bad these were on the centerline of the deck. "HIGH LIFE"