That was a PITA......

[fogducker III]

FINALLY got the motor in, really tight fit, could have installed with exhaust off but the clearance issue was more at the front with the Procharger.........:nilly:

It's all good now, couple of small things to do and should be boating at the first sign of decent weather.....:crossfing:

[HallJ]

Did the stock EFI stuff work okay or did you have to change some things around?

Jeff

[Conquistador_del_mar]

You might want to get one of these for future installations. I have one made by Speedway. It makes the job simple in that you can tilt the engine and it lifts the engine with chains at the ends of the bar. Good looking engine package there! Bill

http://www.sears.com/shc/s/p_10153_12605_SPM1237939401P

[fogducker III]

Did the stock EFI stuff work okay or did you have to change some things around?

Jeff

All that I had to changed was where certain things mount, up graded the fuel system and had the ECM reprogramed......


The rest was basiclly plug and play.......:)

[fogducker III]

You might want to get one of these for future installations. I have one made by Speedway. It makes the job simple in that you can tilt the engine and it lifts the engine with chains at the ends of the bar. Good looking engine package there! Bill

http://www.sears.com/shc/s/p_10153_12605_SPM1237939401P


Thanks Bill, that is an awesome little "gadget" I will have to look into that, price is right.....:yes:

[Just Say N20]

Fog, I haven't read everything about your engine build during the past few days, but I don't remember seeing any dyno results posted.

Secret? It is certainly your secret to keep. I was just curious.

[Carl C]

Fog, I haven't read everything about your engine build during the past few days, but I don't remember seeing any dyno results posted.
Secret? It is certainly your secret to keep. I was just curious.

No secret...http://www.donzi.net/forums/showpost.php?p=588843&postcount=23