View Full Version : Serious Big Block
blackboat
01-06-2011, 06:28 PM
This engine blew me away on another boat site. I could not believe it sold for 10,000 on the first day it was posted .I would have downloaded the engine specs but wasnt sure how to do it.If anyone knows how ,please feel free to do so.Awesome motor !! I would like to see this in a 22 Donzi !! 632 cubic inches for 10K
mrfixxall
01-06-2011, 07:00 PM
This engine blew me away on another boat site. I could not believe it sold for 10,000 on the first day it was posted .I would have downloaded the engine specs but wasnt sure how to do it.If anyone knows how ,please feel free to do so.Awesome motor !! I would like to see this in a 22 Donzi !! 632 cubic inches for 10K
Yes he gave it away....
632 big block for $10k
Brodix Aluminum Tall Deck Block(lifter bores were bushed and sized for larger diameter Chrysler diameter lifters)
Brodix Big Duke Heads 225 lb seat pressure titanium retainers stainless steel valves
Cometic MLS Head Gaskets
Competiton Cams Solid Roller Camshaft
Isky Red Zone Lifters
Jesel Shaft Mounted Rocker arms
Smith Brothers Push Rods (custom)
ATI SFI Approved damper with dual Keyways
Brodix sheet aluminum fabricated valve covers
Brodix Big Duke 4500 Series Dominator style Carb Intake modified for 16 fuel injectors by Wilson Racing
Callies Stealth Billet Steel Crank 4.75 stroke
Oliver Billet rods
Custom JE Forged Pistons Coated with Swain Tech Gold Ceramic Barrier top and PC9 dry film on skirts
Tool Steel 180 wall Wrist Pins
Moroso Billet Oil Pump
Canton Scraper Deep Sump Oil Pan with kick out 8 quart
Rod and main beaings are Clevite 77 Coated H Series
ARP main and head studs
ARP Harmonic Balancer Bolt
Total Seal Tool Steel(extreme duty) Top ring standard tension oil ring for supercharged and turbocharged applications
Competion Cams Two Piece timing cover to allow advancing or retarding cam.
1-618-830-6138
justleft
01-06-2011, 07:06 PM
Still a ton of parts and work needed on that mother.
Twin injectors, Nitros. Can't tell if the fuel rails are even drilled.
I would worry about crank/rods/etc with the HP that big dog should push !!
$10k seems real cheap !
Edit - More then gave it away !!!! It must have an evil curse on it (or the guy needs the $)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.