PDA

View Full Version : Cutting edge propeller



Conquistador_del_mar
12-05-2010, 01:13 PM
Has anyone tried one of these props? Results? Any other recommendations on four blade props other than Hydromotive or Bravo? TIA, Bill

http://cgi.ebay.com/ebaymotors/CUTTING-EDGE-4-BLADE-PROP-PROPELLER-LABBED-22-36-RH-/170573592344?pt=Boat_Parts_Accessories_Gear&hash=item27b6fa7718

Conquistador_del_mar
12-05-2010, 06:14 PM
I actually caught Greg this afternoon at Cutting Edge. He has a new 5 blade cleaver that he will be testing this week that he thought would work better for my Eliminator for top end speed. I might get one of the first ones if everything goes as planned with the testing. I will try to remember to post the final results. Bill

mrfixxall
12-05-2010, 10:25 PM
i dont think your boat needs a defuser ring on the propeller..That will cost you some top speed.

Conquistador_del_mar
12-06-2010, 01:24 AM
i dont think your boat needs a defuser ring on the propeller..That will cost you some top speed.

I agree. Hopefully, his new design 5 blade cleaver will not have it on the hub. Greg is going to send me pictures in a week or so after he has done more testing to make sure they perform as designed. I like what he told me today on the phone with razor sharp leading edges, balanced, and returnable if not totally pleased. His four blade props usually make up to 5MPH better speeds than Hydromotive or Bravo props. Bill

mphatc
12-06-2010, 08:22 PM
when you talk to Greg next time inquire if they make props to fit the older Volvo drives . . sadly w/o Grizz there's a lot of owners without a good selection of props

Mario L.

Conquistador_del_mar
12-07-2010, 01:30 AM
when you talk to Greg next time inquire if they make props to fit the older Volvo drives . . sadly w/o Grizz there's a lot of owners without a good selection of props

Mario L.

Hi Mario,
Here you go:
IF YOU HAVE ANY QUESTIONS, PLEASE DO NOT HESITATE TO CALL ME (GREG) ANY TIME @ 949-701-0900.
Bill

Masterkey83
12-07-2010, 12:09 PM
Looks like a nice prop,let us know how it works...I have a bravo 1 on my boat right now,5 mph extra would be niiiice :-)

ghittner
02-28-2011, 12:35 PM
Feel free to call me anytime with any questions you may have. We only manufacture labbed high performance propellers specifically manufactured for your particular hull and power. See Below.
My Best,
Greg Hittner
Cutting Edge Propellers
949-701-0900

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170606632380&viewitem=&sspagename=STRK:MESELX:IT#ht_1901wt_954

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170605964904&viewitem=&sspagename=STRK:MESELX:IT#h

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170605965159&viewitem=&sspagename=STRK:MESELX:IT#ht_17

HallJ
02-28-2011, 01:17 PM
when you talk to Greg next time inquire if they make props to fit the older Volvo drives . . sadly w/o Grizz there's a lot of owners without a good selection of props

Mario L.

Mario,

The Solas Titan are available from any Solas distributor.
We are fortunate that Grizz pushed the development of these.

Jeff

Conquistador_del_mar
04-29-2012, 01:15 PM
I never ended up buying a 5 blade cleaver design for my Eliminator, but I ordered a 5 blade 27" labbed and polished 15 1/8" diameter round ear for my 28' Warlock yesterday. I talked to Greg about the Warlock and decided to try one of them mostly for the outstanding cruise speed with a possible increase in top end. He told me his typical customer picks up 4 to 8MPH at cruise at the same RPMs using the 5 blade Cutting Edge prop. It will be like the prop in his Ebay ad where I provided the link. I will report on the results when I get the boat running again. Bill

http://www.ebay.com/itm/CUTTING-EDGE-5-BLADE-LABBED-PROPELLER-27-PITCH-PROP-FOR-BRAVO-1-DRIVE-BRAVO-ONE-/170823643607?pt=Boat_Parts_Accessories_Gear&hash=item27c5e1f1d7

Pismo
04-29-2012, 04:59 PM
Wonder what he likes on a 22?

Conquistador_del_mar
04-30-2012, 12:27 AM
You can call Greg - nice guy too talk with. He told me he has helped many Donzi owners.

pipnit
05-03-2012, 03:34 PM
I called Greg twice this past Monday and left messages. No returned calls. Oh well, I guess he doesn't want my money, lol. I swear my dollars look and work just like the rest of them!

Pismo
05-03-2012, 03:47 PM
No surprise in this crazy a$s business..

Conquistador_del_mar
05-03-2012, 05:24 PM
Any time I have called Greg he returned the call the same day if not answered the phone. Keep trying if you want to try one of his props. I know he is a busy man so give him a chance. Bill

BUIZILLA
05-03-2012, 08:14 PM
I recently sent a couple props to Leading Edge in Sarasota, the results were spectacular for the money. Several factory Merc powered boats at the MIA Show ran his props...

he did two props perfectly for me, for what previous shops charged for one..

http://www.leadingedgepropeller.com/index.htm