pcmpete
11-25-2010, 01:08 PM
I have a 302 motor, the pump is a Jabsco. I also have the bracket but when I install them the pulley is 1.5" further forward from the crank pulley.
The bracket itself is like a Z shape (looking from the top) which puts the pump unit forward.
So I either need a straight bracket or pump/bracket combo that works together.
I hope this make sense....
The bracket itself is like a Z shape (looking from the top) which puts the pump unit forward.
So I either need a straight bracket or pump/bracket combo that works together.
I hope this make sense....