22 Blackhawk Project Hull

[Greg Maier]

http://img440.imageshack.us/slideshow/webplayer.php?id=001zz.jpg

For Sale 22 Classic Blackhawk Project Boat. Yes, this is a real Blackhawk hull. The project is about 5 years old and I have had some changes in my personal life that have taken away the motivation to keep working on it. This is for hull/deck/stainless windshield/2 front seats/engine hatch/Trailer only. My plan was to turn this into an Arneson 22, so I have many Arneson and engine parts available also.
I'm not sure where to even price this so how about $8000 to start.
I haven't been on here for a while and am sorry to hear about Big Grizz, may he RIP.

[thriller]

Any Bh Drives or Parts? Merc Tabs? Props for sale?

Thanks, Mike

[Greg Maier]

Sorry, no BH parts. I do have some Arneson Rocker Tabs that I want to get rid of.

Price lowered on the hull to $7000

[Greg Maier]

Price Lowered $6000

[kraffty]

Neat looking project. I am interested in getting 22c and fitting ASD6 drive by removing Bravo 1 with kit from Arneson. What engine/Arneson parts do you have? Do you have engine mounts etc. Looks like you gutted the hull of stringers and floors. I have done a project like this before..alot of work. Let me know what drive parts you have and how much.

[Greg Maier]

I have a complete 1721 with the heavy duty straight cut gears and long propshaft. It includes hydraulics. $4500

I also have a BW Velevet Drive Transmission that was rebuilt with Carbon Fiber clutches and has 9 disks. Built to handle 800+ HP. Zero hours since rebuild $1800

I have a set of Arneson Rocker Plates $1200

[MOP]

The Areneson does not work well on a standard 22 hull, it should do very well on the BH hull due to the rocker in the hull. If you need first hand info PM Donzi he did the swap on a standard 22 and lost quite a bit of speed.

[kraffty]

Thanks MOP. good to know. What is rocker in the hull? That would be a huge disappointment to buy all that high dollar Arneson stuff and go slower.

[mrfixxall]

The Areneson does not work well on a standard 22 hull, it should do very well on the BH hull due to the rocker in the hull. If you need first hand info PM Donzi he did the swap on a standard 22 and lost quite a bit of speed.


mop i think his problem was he had the wrong prop and had no extension box..he put all the weight forward with the transmission and all..

i think it wouls fly with the proper set up..


A rocker hull,,if you look at a standard 22 from the center to the transom at the lower outer bottom side of the hull its straight,,a rocker hull fron the center to the transom it curves up like a leaf spring but not as much..

http://www.donzi.net/forums/attachment.php?attachmentid=42940&d=1233796499 (http://www.donzi.net/forums/attachment.php?attachmentid=42940&d=1233796499)

[kraffty]

Thanks for the explaination. Awesome picture.

[Greg Maier]

Price Lowered $5000

[Greg Maier]

Any interest? I'm open to reasonable offers

[silverghost]

Greg:
Where are you located ?

I have a buddy who has homes in Maryland & Penna. that is looking for an interesting speedboat project !

[Greg Maier]

Brad,

The boat is in Stevensonville, Md, right next to the Bay Bridge.

Thanks

Greg

[OFFSHORE GINGER]

Hey guy after viewing your pics it looks like the boat is still in need of a full stringer system along with a new transom ...................yes ?

[silverghost]

Greg:
Send me an email with your phone and contact info and I will pass it along to my buddy Jim who has a vacation farm property in your area on the Sassafrass river in MD.
Jim IS interested !

[Sweet little 16]

still for sale?