PDA

View Full Version : Cleaning out the garage


Eugene Nahemow
08-16-2010, 12:40 AM
Propco Quad-r-jet prop - Volvo- 14.25 x 22 -RH (one small nick in one blade) $100.00

http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1561
http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1560


Morse Shifter -Pitted - $75.00

http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1549
http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1548

Mallory Billet Unilite Optical Distributor SBC/BBC -$100.00

http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1545
http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1547

Mallory Promaster Coil - $50.00

http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1546

Bow/Transom Eye - $40.00

http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1540

NON - BOATING STUFF


5 Bank Hot Rods - Get your stocking stuffers early $50.00

http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1533
http://www.donzi.net/forums/picture.php?albumid=142&pictureid=1535
Greg Guimond
08-16-2010, 07:43 AM
I will take the switches and the t-flex bezel at ask if you are willing to pay shipping to CT?
Eugene Nahemow
08-16-2010, 10:59 AM
Gree,
PM sent.
cutwater
08-16-2010, 11:03 AM
I will take switches at ask and pay shipping! haha... Seriously though, just let me know if Greg ends up not wanting them.

John
maddad
08-16-2010, 12:50 PM
I'd like the chromed shifter if it's still available. PM sent.
Eugene Nahemow
08-16-2010, 01:53 PM
I will take switches at ask and pay shipping! haha... Seriously though, just let me know if Greg ends up not wanting them.

John

Shipping is $75.00 for those parts!:D
Eugene Nahemow
08-16-2010, 01:55 PM
So Far Sold.

Switches
Chrome Shifter
Bezel
Carb
Mufflers

My son might be able to go back to college this semester.:wink:
Eugene Nahemow
08-16-2010, 01:56 PM
I'd like the chromed shifter if it's still available. PM sent.

PM right back at you.
tamburello
08-17-2010, 12:27 AM
A couple questions about the Gil muffler tips.

1. Do the muffler tips require drilling holes in the existing tips for set screws to be installed?

2. I currently have the external salisbury flappers on my straight cut tips. Can I use my salisbury flappers with these or will I need to install internal flappers?

Thanks!
Eugene Nahemow
08-17-2010, 02:18 AM
A couple questions about the Gil muffler tips.
1. Do the muffler tips require drilling holes in the existing tips for set screws to be installed?
2. I currently have the external salisbury flappers on my straight cut tips. Can I use my salisbury flappers with these or will I need to install internal flappers?
Thanks!

They do not require any drilling of holes.
You slip them on over you 4" pipes and tighten the clamps.

They will not fit over a set of external flappers.
They fit tight to exhaust pipe.
Although, I am not sure why you'd need any flappers with the baffle system inside the silencer.
tamburello
08-17-2010, 01:59 PM
I'll take the GIL silencer tips. PM sent. Thanks!

- Jeff
Greg Guimond
08-17-2010, 08:44 PM
Check your Paypal account :yes:
Eugene Nahemow
08-19-2010, 10:09 AM
Greg,
Packing up your parts today.
Thanks.
morey43
03-31-2011, 06:48 AM
Hi, do you still have parts if so please email me. Thank's jesus
Eugene Nahemow
04-03-2011, 08:29 PM
I have all the parts that are posted with pictures.