PDA

View Full Version : Turbo Prop question



Barry Eller
08-11-2010, 09:12 AM
I have had a Turbo I 25" for several years and have never tried it. I got it out of the box yesterday and installed the T-LOC hub for my OMC splines (TTL200 OMC). There is no provision for the prop nut lock tab...it is smooth and if I try to put the slide on tab lock (looks like a thrush washer) there are not enough threads to tighten.

BUIZILLA
08-11-2010, 09:32 AM
use the thick (1/4") ID splined Merc or OMC washer with a Merc NyLock nut...

Barry Eller
08-11-2010, 01:45 PM
use the thick (1/4") ID splined Merc or OMC washer with a Merc NyLock nut...

The splines are flush with the hub...splined washer would not have any splines to fit. I'll just get a thick washer and use locktite on my prop nut. Thanks Jim.