PDA

View Full Version : Labbed Mirage Plus 25P prop



DickB
07-23-2010, 11:11 AM
BBlades labbed Mirage Plus 25P prop in good condition. Too much prop for my boat. $400. Send me a PM.

Dick


http://www.customwooddash.com/stuff/S6302633.JPG

http://www.customwooddash.com/stuff/S6302634.JPG

http://www.customwooddash.com/stuff/S6302635.JPG

craigdskilling
08-02-2010, 08:34 PM
Is the prop still for sale.You say It's to big why.I have a 23p with A new motor pushing 400+hp.Will it work with a alpha.

DickB
08-03-2010, 11:31 PM
It's still for sale. It worked for me with a 1:62 ratio Alpha Gen 2 drive. That drive recently broke, and I replaced it with a 1:47. I can no longer get into the recommended WOT RPM range with this prop.

craigdskilling
08-04-2010, 02:50 PM
What does labbed mean.My alpha is 1:50 ratio.I'm not sure what to turn 25 or 27 you have lots of experience this field from what i read in alphas whant to go faster,wild how that spread went.craig

DickB
08-04-2010, 07:58 PM
"Labbed" means that the prop has been reworked by a specialist - a lab - to tune the prop for performance. This prop has had the blades thinned for less resistance and tuned and balanced. It can work well with an Alpha drive. With your 23p and 400+ hp moter and Alpha 1.50, what RPMs are you running at wide open throttle?

craigdskilling
08-04-2010, 08:33 PM
I'm running 6000 easy at wide open. I would like to drop it to 5000/5800 max.I'm not shore on the speed but I think Im in the70s for sure.My speedo was reading 75 but that cant be right.

DickB
08-05-2010, 07:14 PM
Going from a 23 to this labbed 25, I would guess that your RPMs would drop about 200-300. It's not uncommon for the speedos to read a bit high, mine is about 3-4 mph higher than GPS.

craigdskilling
08-06-2010, 07:53 PM
How can we ship that to ontario.And are you firm on 400.

DickB
08-07-2010, 09:10 AM
I sent you a private message.

miike
04-17-2013, 02:20 PM
I'll buy it if you still have it. PM me.

DickB
04-18-2013, 08:07 AM
Sorry, should have marked this sold long ago.
BTW mike your message inbox is full.