PDA

View Full Version : 18 2+3 351 1971 Original trailer


BubbleBee
06-26-2010, 10:08 AM
Hey guys selling my 18 2+3. I just dropped an engine in due to cracked block. I still have the blok and rotating assembly due to it was 9.5 to 1 and 30 over. Also just wet sanded buffed cleaner waxed and polished the boat. Totally rewired the boat front to back with quick disconnects (made my own wireing harness like merc to unplug and pull engine easier). New battery fresh oil in the drive repacked wheel bearing. New fuel pumps fuel filter. New trailer lights reflectors and wireing. Runs 50's turn key and has Hi Po tru hull exhaust with stailess 45 tail pipes.
Its the Yellow with a Black stripe down the center.

Asking 7K Best Offer. Need to sell ASAP i dont want to miss my chance at a sweet 22 Classic!!!!
Mike Novaboy71@aol.com
BubbleBee
06-27-2010, 02:20 PM
A few pics and also i put a trim motor in it due to the one in the boat was nfg
BubbleBee
06-27-2010, 02:37 PM
a couple more although i dont know why they arnt showing up in the thread
HOWARD O
06-27-2010, 07:50 PM
They're not showing up because you are uploading bmp's, not jpegs.
BubbleBee
06-27-2010, 09:21 PM
Ah thankyou H
-Mike
Just Say N20
06-28-2010, 05:59 AM
Viewable.
BubbleBee
06-28-2010, 10:36 AM
Thanks Just glad you could do it as you see i didnt have the nack
BubbleBee
07-01-2010, 09:51 AM
5500 takes it the 22 is slipping away. My buddy gave me a little more time but he wants it out
Mike
BlownCrewCab
07-01-2010, 10:10 AM
What kind of Outdrive is on there?
BubbleBee
07-01-2010, 01:31 PM
I know its a volvo but not sure what model i can get numbers if needed
BubbleBee
07-06-2010, 08:03 AM
5K want it gone i have 1 week before he lets the 22 go to some one else.
-Mike
BubbleBee
07-09-2010, 09:49 AM
I just threw in a new lift motor and worm gear set up for the drive. New holley 650 Edlebrock Performer rpm intake with spacer and a full tank of fuel. And I will possably deliever it depending on location ad pre arrangements.
Thanks
Mike
BubbleBee
07-09-2010, 09:50 AM
Oh last I did pick up a new set of Hatch Locks tht i just installed over the weekend
-Mike
glenncal1
07-09-2010, 10:14 AM
Mike-where is the boat located? I am in Colorado. Jim
BubbleBee
07-09-2010, 10:43 AM
Its in S.E. Mass also sent you a PM reply
-Mike
BubbleBee
07-12-2010, 01:11 PM
Anyone want it. Took it out this weekend ran great it rips. Id say def. 60 maybe little more.
Mike
CAPTBEACH
07-12-2010, 02:32 PM
I want it but getting it is another question...can you send or post pics of her now...you mentioned you had cleaned her up a little...

I really am looking for a 16 but looking at 18's too...

I already have 3 boats...

1981 Master Marine 28' Center Console (Moonie boat) Suzuki 250 from Newburyport Mass

1974 SeaCraft SC20 Center Console 2010 Suzuki 175 (55mph) $23K in complete cap off resto...

2008 Kawasaki 1200 Jet Ski (67 mph)

I fell in love with a 1966 Donzi 16 sitting next to me in dry storage...now I gotta a have one...