WTB: imco or sportmaster 2" shorty.

[Tborisch]

I'm still looking for a 2" shorty. 1.5 ratio and 1" shaft.

Anybody?

Thanks,
Tom

[Carl C]

Tom, FYI you can get a 1 1/4" hub for the Bravo 1 prop.

[Tborisch]

Tom, FYI you can get a 1 1/4" hub for the Bravo 1 prop.

Yeah, but i don't really need the big shaft. The upper will break before the 1" output will...

I would take a 1.25 if somebody had one.

Tom

[Carl C]

I would take a 1.25 if somebody had one.


That's what i mean :)

[Tborisch]

Shorty on the way.. :)

[Carl C]

Yay!!

[Tborisch]

Yay!!

Lol, that's what I said!

Hey, Tell me about the install. Do I need anything besides the shorty it's self?

seems like about a 1 hour straight forward kind of deal.

Tom

[Conquistador_del_mar]

You will probably want to get the bolt on ss cavitation plate that goes for $100 if I remember correctly. Bill

[Carl C]

Lol, that's what I said!
Hey, Tell me about the install. Do I need anything besides the shorty it's self?
seems like about a 1 hour straight forward kind of deal.
Tom

You will probably want to get the bolt on ss cavitation plate that goes for $100 if I remember correctly. Bill

It's a simple bolt on that should net you 2-3 mph since that is what I saw on my nearly identical boat (at the time). It should work well with the Bravo 1 prop. You will now be able to shoot a cool roostertail and, yes the cavitation plate will be needed and should come with it.

[Tborisch]

Comes with everything I need.. And it's a 1.25 shaft. I just ordered an imco shower and one of there stainless hub adapters.

Tom

[Carl C]

You will need a speedo pitot since the Imco has no provision for hooking up the stock speedo. Let me know if you have any tech questions. I have the service manual.

[Tborisch]

I'm going to get a gps speedo if I can find one big enough to fit the hole in my dash.

Tom

[osur866]

Make sure the lil plate that screws in place of the anode is tight, my allen bolt backed off a few weeks ago loosing the plate and doing this to my fav. prop :mad: