Classic 18 Dash Panel

[Frank Sparfel]

Looking for a dash panel for an '87 Classic 18. Does anyone know if they are available repro? Thanks Frank

[Choprpilot]

I'm looking for one too. I talked with Jamie at Lakeside and could repop one for aprox. $400-$500. You have to send your Dash in to him.

[hot shot]

I have one for a 22 not sure they are the same but i think they might be and its white with all the gauges either a speedo or a didgital gps... my fone 734 516 1242 could send you pic's mick

[LKSD]

There are different panels with different prices. All the original ones are NLA.. I can make replacements but prices do vary depending on what is getting done.. The ones with VDO gauges are different from the later years, there were also a couple different versions from what I remember.. :) Jamie :convertib:

[deanco]

they are easy to make of you have a friend with the basic machine shop or workshop with a drill press and jig saw.

[Bobby D]

Get the cardboard out use your imagination and make one. Take your time and when you are done it will be the way you like it.

[Frank Sparfel]

Get the cardboard out use your imagination and make one. Take your time and when you are done it will be the way you like it.
Thanks, my kids could do that. I was looking to keep the boat as factory think there was some NOS out there.

[Bobby D]

Clarification what I should have said was use cardboard to make a template before fabrication that way adjustments can be made before the material is cut.
Since you already know what you want good luck locating one.