PDA

View Full Version : Hull I.D #



daved
04-28-2010, 10:53 AM
Does anyone know if Donzi put the hull i.d #s at any other location on the 22 classic other than the transome? I had the hull refinished and the numbers are now covered up. I appreciate any info.
Thanks,
Dave

mattyboy
04-28-2010, 11:42 AM
I think post 1984 HIN were required in 2 spots on the hull, starboard side upper part of the out side of the transom by the deck hull joint then another was required on the inside of the deck by the deck hull joint in the same general area as the one on the outside. a hidden one so to speak incase someone covered up the outside one.

fogducker III
04-28-2010, 11:48 AM
Failing that, if your boat has/had state registration markingsyou might be able to trace a record of the HIN from there?

daved
04-28-2010, 01:20 PM
I know the # from the reg I have and I do have a rubbing of the engraved#s. I just want to be ok if I am asked why no numbers are visible on the hull.
Thanks for the help. I will look on the inside.
Dave

VetteLT193
04-28-2010, 01:42 PM
The new ones are riveted on. you could just get a plate made and rivet it on in the appropriate spot.