PDA

View Full Version : 24p Merc Chopper prop


flying tomato
04-27-2010, 07:40 PM
Used 24 pitch Mercury Marine Cleaver 3 blade ss prop. Solid hub. In very good shape. 100.00 plus ship
BUIZILLA
04-27-2010, 07:47 PM
that's a cleaver...
Jraysray
04-27-2010, 07:54 PM
Used 24 pitch Mercury Marine Chopper 3 blade ss prop. Solid hub. In very good shape. 100.00 plus ship

Fit an Alpha?
flying tomato
04-28-2010, 09:28 PM
yes it will fit an Alpha.
MOP
05-02-2010, 08:44 AM
Solid hubs are not recommended on the Alphas, not having the cushioning effect of the rubber hub shortens the life of the shifter dogs. This is pretty well known, stay with rubber hub props on Alphas!
Jraysray
05-02-2010, 09:49 AM
Warning on the solid hub props for Alpha a no no. Thanks for the PM's I got a couple. 10-4 over and out....
mattmck13
05-24-2010, 05:16 PM
will thise fit a alpha ss drive i i saw post on how soild hubs were bad but i would only run on mine when i wanted straight performance i have a 86 wellcraft scarab 1 with a built 355.
flying tomato
05-25-2010, 05:13 PM
Yes it will fit all alpha's. 13 spline.
Let me know.
MOP
05-25-2010, 06:40 PM
That prop will fit Alpha and Bravo drives, it is tough on the Alpha clutch dogs. It is a stern lifting prop, works great on some hull and poorly on others. Try it you might like it! It is 15 spline prop!!!!
Flukecapecod
06-14-2010, 12:32 PM
Used 24 pitch Mercury Marine Cleaver 3 blade ss prop. Solid hub. In very good shape. 100.00 plus ship

Brand new to this site thanks to your ad for this prop on Google, I found, and hence now I'm a Donzi Regisrty member.... and wow look at all the neat stuff here.

My email is fluke49@hotmail.com

My ph. 508-477-0016 (Mass.)
Flukecapecod
06-15-2010, 10:28 AM
Used 24 pitch Mercury Marine Cleaver 3 blade ss prop. Solid hub. In very good shape. 100.00 plus ship


seeing there's so much insight here I figure I'll tell you what I'm up too... I have a vintage 1968 Maltese Magnum Missle -16' this is a catamaran hull and weighs in at 500lbs plus the motor a 200HP Merc.. but we are having prop-blems getting this thing running at its potential speeds...

I figure props. we have a 5 blade "Highfive" 23p, a 26p 3blade is not digging in at low speeds so this 24 seems to be a logical move ?