View Full Version : Volvo 270 shift cable bellows
HOWARD O
04-16-2010, 03:05 PM
Have Googled to no end, find some for Mercs, Volvo SX drives, but nothing specifically for older model Volvos. Where can I find one? :nilly:
Kirbyvv
04-16-2010, 03:33 PM
Try West Marine http://www.westmarine.com/webapp/wcs/stores/servlet/producte/10001/-1/10001/17074?&cid=chanintel&ci_src=14110944&ci_sku=17074
Clean the boss off where it slips on and use non hardening gasket compound on the mating surfaces, it helps to seal it and stops corrosion of the boss.
HOWARD O
04-16-2010, 07:22 PM
Try West Marine http://www.westmarine.com/webapp/wcs/stores/servlet/producte/10001/-1/10001/17074?&cid=chanintel&ci_src=14110944&ci_sku=17074
Holy Moly, thanks Kirby but man oh man, there has GOT to be another source for this tiny, little thing. 60 bucks?
Tom is going to have an absolute cow on that one! :shocking:
HOWARD O
04-16-2010, 07:23 PM
Clean the boss off where it slips on and use non hardening gasket compound on the mating surfaces, it helps to seal it and stops corrosion of the boss.
Thanks Phil, will do. Now Phil, would YOU pay $60 for that little sucker? Come on, old fart, give up the cheap source! :cool:
HOWARD O
04-16-2010, 07:45 PM
I think West Marine has their listing messed up. SIERRA #18-2758 is for the exhaust bellows.
mattyboy
04-17-2010, 09:06 AM
www.allislandmarine.com (http://www.allislandmarine.com)
Here ya go under $10 to you door!
http://www.marineengine.com/newparts/part_details.php?pnum=SIE18-2763
HOWARD O
04-18-2010, 04:24 PM
Here ya go under $10 to you door!
http://www.marineengine.com/newparts/part_details.php?pnum=SIE18-2763
I've seen a gillion of them and it's for a Cobra, but my questions still remains.....will it fit properly on a 270? Isn't a Cobra basically an OMC? I have no idea if the boss diameter is the same? If you say it'll fit, Phil, we'll buy it.
I will call my supplier tomorrow to see what the real skinny is!
HOWARD O
04-18-2010, 05:59 PM
I will call my supplier tomorrow to see what the real skinny is!
Thanks Phil! :bighug:
Howard PM me you number you have the old setup not the bellows, I was not thinking when I answered you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.