PDA

View Full Version : Bravo III?



zelatore
02-25-2010, 02:45 PM
Sorry, should put this in the parts section but there's a lot more traffic here.

Anybody got a good source for Bravo III parts? Looks like I need at the least a lower case, but could go with a complete lower or even a complete drive (with a bad upper maybe?) at the right price.

I've got a 2007 Sea Ray with a BIII that's just moth-eaten. The upper and the gimbal are OK, but the lower is paper-thin. Luckily no water or apparent damage to the internals, but trying to save the lower is really a non-starter.

Thanks!

VetteLT193
02-26-2010, 04:04 PM
I switched a Formula SS from BIII's to B1's. I'd suggest going that route to save dough. Go with a 4 blade prop like the bravo 1 and you should be happy. you can find used B1's for cheap these days.

FISHIN SUCKS
02-27-2010, 11:21 AM
Hey Don, I know Harbormaster (aka Scot) hooked my buddy John (kimjohnandmacy) up on a BravoIII, at a smokin deal. Look at the ad on the left side of this board for Victory's #.