View Full Version : chevy 5.7 mostly complete
obsessed1
02-15-2010, 03:59 PM
If any of you guys are interested in a 5.7 260 hp merc I have one complete minus intake and ignition. Its has exhaust and closed cooling. All assys still on it. (coupler,fuel pump, power steering, alt.water pump, bellhousing, ect) I was told it ran when removed from the boat, but am unsure of condition of the lower end. Asking $600 plus shipping. 847 613 7319 Rob
thehow33
02-15-2010, 04:44 PM
where do you live, I live in Lemont and I'm interested
NJFASTECH
02-15-2010, 05:11 PM
I am also intrested. Location?
obsessed1
02-15-2010, 08:13 PM
Winthrop Harbor, IL (60096)
NJFASTECH
02-15-2010, 08:41 PM
any pics what year?
For $600 run don't walk! The accessories and cooler are worth more that, if it were closer I would grab it just to do it up and sell it!
NJFASTECH
02-16-2010, 06:03 PM
Do you have a crate for the motor? I will work on shipping quotes on my end. Can you provide a zip code.
Thanks,Jim
obsessed1
02-16-2010, 08:43 PM
zip code is 60096. Here are a few pictures
obsessed1
02-16-2010, 08:44 PM
Do you have a crate for the motor? I will work on shipping quotes on my end. Can you provide a zip code.
Thanks,Jim
I dont have a crate but I might be able to locate one or build one if needed.
obsessed1
02-16-2010, 08:46 PM
I also have another set of heads included in the price that go with it.
mrfixxall
02-16-2010, 10:23 PM
Rusty intake ports!! was their water in the engine?
realbold
02-16-2010, 10:35 PM
Too bad you're not parting it out. I could use the raw water pump setup.
obsessed1
03-21-2010, 06:23 PM
parting out if anyones interested
NJFASTECH
03-22-2010, 05:23 PM
parting out if anyones interested
I need the shift bracket of the exhaust manifold, and the alternator
How much?
NJFASTECH
03-22-2010, 05:26 PM
also thermostat housing?
CaribouLou
03-22-2010, 09:10 PM
how much for the whole FWC system?
realbold
03-23-2010, 03:07 PM
I need a price for the raw water pump setup, pump, pulley, bracket and brace.
Trueser
03-23-2010, 04:26 PM
I need the shift bracket of the exhaust manifold, and the alternator
How much?
I have two sets of MERC manifolds available.
And they are perfect....
obsessed1
03-23-2010, 06:49 PM
I need the shift bracket of the exhaust manifold, and the alternator
How much?
How about $50 plus the ride
obsessed1
03-23-2010, 06:50 PM
also thermostat housing?
Sorry, no housing.
obsessed1
03-23-2010, 06:53 PM
how much for the whole FWC system?
When you say whole system, what do you mean? I would assume heat exchanger, brackets, hoses, I am not exactly sure what else there is, but how about $100 ?
obsessed1
03-23-2010, 06:56 PM
I need a price for the raw water pump setup, pump, pulley, bracket and brace.
How about $50 plus the ride?, but the plastic housing on the pump would need to be replaced because one of the hose fittings is cracked.
realbold
03-23-2010, 07:11 PM
How about $50 plus the ride?, but the plastic housing on the pump would need to be replaced because one of the hose fittings is cracked.
Fair enough. Sending a PM.
CaribouLou
03-25-2010, 10:57 AM
When you say whole system, what do you mean? I would assume heat exchanger, brackets, hoses, I am not exactly sure what else there is, but how about $100 ?
Where are you located? Can you figure out shipping to 98125?
obsessed1
03-25-2010, 06:02 PM
Where are you located? Can you figure out shipping to 98125?
Winthrop Harbor IL 60096. I will try to get a ballpark shipping quote tomorrow.
CaribouLou
03-25-2010, 11:31 PM
Cool thanks.
obsessed1
03-26-2010, 10:34 AM
A rough estimate to you is $35
realbold
03-31-2010, 06:15 PM
Sea water pump assembly made it here today as described.
Thanks Rob.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.