PDA

View Full Version : wanting a 25p Mirage



flying tomato
12-04-2009, 07:39 PM
Wanting a 25 Mirage, in very good or excellent condition.

CaribouLou
12-04-2009, 08:34 PM
Me too actually.

oledawg
12-05-2009, 05:31 AM
Me too actually. Is there an echo here? Anyway, my '88 22C came with a 27p Mirage which would only turn 4,200 rpm, during the winterization I had it changed to a labbed 23p ( unknown brand ) that I bought for $50 on this site ( came off of a Panjera - sp? ), but as it hasn't been back in the water I am not sure what the result will be. Definitely the RPM should be up, just not sure how the overall performance will end up being. At 4,200 rpm I was pushing 65 GPS mph, so should be able to get a couple more MPH out of the 23p. Supposedly the 25p is the ideal prop for this boat, and would love to have one in my inventory. I keep looking at eBay to see if one pops up and there have been several, but all were just a little more than I want to pay given I haven't even tried the 23p yet! There is a "sweet spot" in there somewhere.

Zinger
12-05-2009, 06:13 PM
I have a 25 mirage plus solid hub, make me an offer. I'm looking for a big prop 3 or four blade.

CaribouLou
12-05-2009, 07:57 PM
How hard is that to re-hub for a OMC king cobra?

oledawg
12-06-2009, 10:40 AM
OK, being that I am not a prop expert, how does that relate to a splined Bravo One shaft? Will it fit? Is it RH or LH?

Thanks.

Zinger
12-06-2009, 06:22 PM
RH prop , the hub is part of the prop you can change it. I'm not sure if it would fit a omc. Email me and I will send you some pictures.

oledawg
12-07-2009, 05:37 AM
browder@nuventrs.com for pics

VetteLT193
12-07-2009, 07:56 AM
I have one for sale. Freshly blueprinted (but not labbed) by BBlades. The way BBlades does the work is they don't polish them so it looks like crap but it is supposed to be 'faster'.

Has a hub, it's still bolted to the piece of wood BBlades sent it on. It was only used a couple times for testing when it became very obvious BBlades didn't do what was asked. As far as I can tell it is a freshly blueprinted 25 Mirage + with no other modifications.

oledawg
12-07-2009, 08:09 AM
So, it is set to slide on a Bravo One? Splines, etc? Got pics?

VetteLT193
12-07-2009, 09:54 AM
So, it is set to slide on a Bravo One? Splines, etc? Got pics?

The one I have is set for a Bravo 1. I think there is a new hub in there too, but I have to unbolt it to check. I think all you will need to put it on a bravo is the bolt and lock washer.

I can take pics when I get home. It's sitting in my office there.

CaribouLou
12-07-2009, 10:04 PM
Send me pics kericksonzj@gmail.com

thanks

VetteLT193
12-09-2009, 07:01 AM
sorry, haven't had a chance to grab pics. I actually keep forgetting because I'm redoing the laundry room for my wife for Christmas so that's been keeping me busy at night.

I'll do my best tonight :bonk: