Trim Tabs + Outboard Wanted

[Greg Guimond]

Need a complete set of trim tabs. Will consider all sizes but must be in good shape all the way to new. Also need a used O/B motor. Minimum 225 but prefer 250 or 300. Etec, Mercury 250 EFI, or even Yamaha Ox66 all possible. Must be clean and location does not really matter but the closer to LA the better. Feel free to pass my direct email over to non site members with egg beaters ! Thanks - Greg. guimond_greg@emc.com

[dwiggl]

Greg, Check out screamandfly.com. They are a great group of egg beater geeks. Trouble is out here there are not so many good deals as in the east. Lots of outboard performance folks in Texas, Louisiana, Tennesee, etc. They have access to a seeminly unlimited supply of fresh water "motaz" as they call them.
Good luck!

[Greg Guimond]

To the top for "tabs" and "motaz" :crossfing:

[Greg Guimond]

Still looking ............!

[Greg Guimond]

Got the motor but still need the tabs. I have been told that Mercury made a "mini" K-Plane that has since been discountinued. Anyone happen to have a photo of these they could post?

[seano]

Ive got a set of 280s on craigslist.

http://longisland.craigslist.org/boa/1534281658.html

[Ed Donnelly]

seano; That is a real deal for someone......................Ed

[CHACHI]

That is a smokin deal.

Ken

[Greg Guimond]

Seano, thanks but I am looking for the smaller K planes

[VetteLT193]

I got a set of the dual ram bennetts. they came from Hedgehog's boat. I can get pictures later if you are interested. They are powdercoated in metallic red.

[Greg Guimond]

I was hoping to get the mini K's ............

[VetteLT193]

I was hoping to get the mini K's ............

I understand, they do look cooler. If you can't find them and are interested in these just let me know. They are literally sitting in my garage. I planned on putting them on the Minx... but that's gone now.

[seano]

greg,

if this is the set you are looking for, give my buddy Jim a call. he has the same ones and is asking 2k...I think he's open to offers as well. I've seen his and they are in VERY nice condition. 631 872 7700

Just so I am clear...the tabs in the link below ARE NOT the ones my buddy is selling. He has a set JUST like them.

http://cgi.ebay.com/ebaymotors/Kiekhaefer-Brunswick-Hi-Performance-racing-trim-tabs_W0QQcmdZViewItemQQhashZitem335902acb1QQitemZ2 20536679601QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear

btw, mine are sold :)

[Greg Guimond]

Thanks seano, I have made contact!

[seano]

cool. jim's a good guy, so i'm sure he'll treat you right.

[seano]

Greg,

How did you do here?

Sean