PDA

View Full Version : Corsican V-Drive



WA-LO
09-02-2009, 03:12 PM
I am just thinking out load here. My Corsican is ready for assembly, it has
a 427 Tunnelport sideoiler new vdrive rebuilt 72c , new builtrite int. one
of the last that was done by John. New winshield. ETC. I am going to sell
boat , but while the deck was still off I thought I would offer it without
power. It is much easier to rig with it off. So I thought I should chime in here before I complete the boat, as some people prefer Chevy power etc.
and to also do there own rigging. Again this is just for imput, The boat has
new gel in the original colors as it is in the gallery. I will get pics some time next week.

MOP
09-02-2009, 06:01 PM
There were very few with the 427 V drives it may be worth far more if it is all kept together!

BUIZILLA
09-02-2009, 06:27 PM
what gallery ?

WA-LO
09-02-2009, 06:34 PM
It used to be in the registry. C18C11

rustnrot
09-03-2009, 08:43 AM
Interested in boat without power or drive or rigged. Is the transom hole filled awaiting new cutout? Stringers--original or replaced?

Price? Pics?

WA-LO
09-03-2009, 01:21 PM
The boat has original stringers that are perfect/ New imco fuel tank installed
The transom has wood only were the rudder assy. attaches and was
not in need if replacing/ This boat sat indoors for years and had very
little use from what I could tell. If you were not using the vdrive set up
you would need a full woo transom and supports, My glass guy could do
it with no issues. I will get pics up next week and talk to you about it.