View Full Version : Steering wheel for 20' Minx
riverbuoy60
08-11-2009, 04:05 PM
Hi fellow Donzi owners,
This is my first post here and I'm impressed with the detailed threads.
I have a 1988 Minx with the original steering wheel that is at its last stand. I'd like to know if anyone has sources for replacement wheels (13") and Donzi hubs. Thanks very much.
riverbuoy60
jimishooch
08-12-2009, 09:34 AM
if you have a 5 bolt pattern wheel try www.jegs.com (http://www.jegs.com) part # 470-779. the white was an exact replacement for my old tired gray wheel and works with my white interior. didn't need to swap hubs just the wheels but it does come with a 2" hub.
good luck
jim
or go here for more info,
http://www.grantproducts.com/c-69-hand-stitched-vinyl-wheels.aspx
VetteLT193
08-13-2009, 08:22 AM
If you aren't too picky there are ton of marine wheels on ebay that come with the hub. all you have to do is pull the wheel and hub off together and bolt the new one on.
riverbuoy60
08-14-2009, 08:03 AM
Thanks for the replies. Say - any of you guys own a Minx? I'd like to get some info on this boat.
Cheers,
riverbuoy60
joseph m. hahnl
08-14-2009, 07:06 PM
Hi fellow Donzi owners,
This is my first post here and I'm impressed with the detailed threads.
I have a 1988 Minx with the original steering wheel that is at its last stand. I'd like to know if anyone has sources for replacement wheels (13") and Donzi hubs. Thanks very much.
riverbuoy60
The wheel is most likely a Momo
http://www.momousa.com/products/products/steering-wheels.html
The Monty Carlo will allow you to use your foam steering wheel cover:drive:
CHACHI
08-14-2009, 08:00 PM
Thanks for the replies. Say - any of you guys own a Minx? I'd like to get some info on this boat.
Cheers,
riverbuoy60
All you have to do is ask. You will have more info than you will know what to do with.
Ken
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.