Carburetor Shop

[Ed Donnelly]

Is anyone familiar with the metering plates for Holley carbs??
You don't have to remove the float to get at the jets..
The jets are removed from the top of the metering block
(I can take pics if needed) Was told that you have to go up 10 jet sizes by just using the plate.. I have both primary and secondary plates and they but are threaded for power valves........Ed

[BUIZILLA]

email me the pic's

[Ed Donnelly]

Buizilla; I'll take some pics and send to you when I get back from 1,000 Islands.....Thanks...............Ed

[BigGrizzly]

%The jets are in the bottom of the plate. I have my own opinion on the powervalve with blower applications.

[mrfixxall]

Is anyone familiar with the metering plates for Holley carbs??
You don't have to remove the float to get at the jets..
The jets are removed from the top of the metering block
(I can take pics if needed) Was told that you have to go up 10 jet sizes by just using the plate.. I have both primary and secondary plates and they but are threaded for power valves........Ed


Ed,do you have the percy adjustable metering blocks?

[Ed Donnelly]

Here are some pics of the plates

[Just Say N20]

Yikes!

Brave guy putting engine parts on "white carpet" :eek:.

You have confidence in your clean-ness. :yes:

[zelatore]

Yikes!

Brave guy putting engine parts on "white carpet" :eek:.

You have confidence in your clean-ness. :yes:

Actually, it wasn't white when he went to sleep last night but it was when he got up this morning. Seems he left his windows open overnight and the winds were out of the west when a big white cloud blew in and settled on everything.

Satellite imagery has the cloud originating somewhere over Michigan...OSHA, NOAA, and possibly the DEA have all been looking into this.

[Ed Donnelly]

That gentlemen is the back of a blue bar towel " Beck's non alcoholic
Champion of Champions................ED

p.s. DON'T MAKE ME TAKE PHOTOS OF IT