View Full Version : Need a little help with my drive
guy with the red donzi
06-22-2009, 09:09 PM
Well I am finally getting the interior done in my 1976 Donzi 16. Before I brought it up to the guy I pulled the drive so I can replace the u joint and check to see if it has any leaks. Well when I pulled the drive the bellow was filled with gear lube. Where is there a good place to get Volvo parts on the web. The marina I deal with doesn't deal with Volvos. Also does anyone have the cover that goes over the shift linkage on a Volvo 270. Mine didn't have one when I go it. thanks chris
mattyboy
06-22-2009, 09:10 PM
i have a shift cover where in nj are you???
guy with the red donzi
06-22-2009, 09:31 PM
I'm on Lake Hopatcong.
mattyboy
06-23-2009, 07:10 AM
I have a shift cover and a used but good bellows and probably some other stuff I'll look plus some props i'll let ya know
www.allislandmarine.com
www.dougrussell.com
I have used both in the past
guy with the red donzi
06-28-2009, 05:43 PM
I am having a hard time trying to find the seals for my exhuast. Where the exhuast comes through the hull I have a 6" hole. But over the hole is a stainless ring that screws in to the hull. Then there is a piece of rubber sandwiched between the hull and the ring. The center of the rubber has a 3" holefor the exhuast to slide through. I saw it on an old cigarette thats at a marina by me but they don't know where to get the rubber. Does anyone know where I can find the rubber? Also I need exhuast pipe as wellto go through the rubber. Any help would be great. Thanks Chris
mrfixxall
06-28-2009, 06:10 PM
I am having a hard time trying to find the seals for my exhuast. Where the exhuast comes through the hull I have a 6" hole. But over the hole is a stainless ring that screws in to the hull. Then there is a piece of rubber sandwiched between the hull and the ring. The center of the rubber has a 3" holefor the exhuast to slide through. I saw it on an old cigarette thats at a marina by me but they don't know where to get the rubber. Does anyone know where I can find the rubber? Also I need exhuast pipe as wellto go through the rubber. Any help would be great. Thanks Chris
like thease?http://eddiemarine.com/store/cart.php?m=product_detail&p=11436&c=58 thease are 4'' tho.
DonziBuoy
06-28-2009, 09:31 PM
I have the same boat (pardon the pun, yuck, yuck), with the 270 VOlvo Penta outdrive. So I too, want to find the right person in the Long Island area, who knows these drives -
I found this site that seems to sell old Volvo Penta parts:
http://www.marinepartsexpress.com/?source=google&group=volvo&gclid=CLaW1OfZq5sCFQtN5QodPTr
Another place to check for parts with pictures.
http://www.hlsm.com/
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.